Octave; Piano Mode; Metronome - Kurzweil KP110 User Manual

Octave

The octave function will raise or lower the pitch of the keyboard voice by
an octave.
1.
Holding down [SHIFT] button and then press the [OCTAVE] button to
select octave function menu. The LCD displays "xxx Octave".
2.
Use [+/YES]/ [-/NO] button or data dial to change octave value,
adjustable range is: -1~ +1.
3.
Press the [+/YES] and [-/NO] buttons simultaneously to restore
default setting: 000.
Note:
1. After adjusting the octave, notes in the highest and lowest keyboard
range may not sound normally.
2. You can set the octave value respectively for voice R1/R2/L.

Piano mode

This function is to set the voice of the whole keyboard to piano instantly.
1.
Press [PIANO] button to enter or exit piano mode.
2.
In piano mode, the accompaniment control is the same as in the
other modes, however, the accompaniment only plays the rhythm
part.
Note:
In piano mode, the A.B.C. is automatically turned off.

Metronome

The metronome provides a steady beat to help you practise at a preset
tempo.
1.
Press [METRONOME] button to start the metronome.
2.
To stop the metronome, press the [METRONOME] button again.
(You can set its time signature in the function menu.)
Note:
1. If you turn on the metronome during style playback, the metronome
sound will start from the next beat and its time signature will match
the current style.
2. In recording mode, you can turn on the metronome, but the metronome
sound will not be recorded.
Playing Voices
SHIFT METRONOME
OCTAVE
PIANO
METRONOME
OCTAVE
13