Konica Minolta Magicolor 7450 Reference Manual page 199

Item
Tray Chaining
Tray Mapping
Apply button
Clear button
Logout button
Configuring the Printer
Description
Tray Chaining If Enable is selected and the specified
paper tray runs out of paper during print-
ing, a paper tray loaded with paper of the
same size is automatically selected so
printing can continue.
If Disable is selected and the specified
paper tray runs out of paper, printing
stops.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
Tray Mapping If On is selected, Tray Mapping Mode is
Mode enabled. Paper feed from physical tray
allocated in each logical tray.
If Off is selected, Tray Mapping Mode is
disabled.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
Logical Tray Specifies which physical tray is allocated
0–9 in the logical tray.
Choices: Physical Tray 1, Physical Tray 2,
Default: Physical Tray 1 (Logical Tray 2)
Configuration Menu Equivalent:
Applies the configuration settings for this
window.
Resets all configuration settings to previ-
ous values.
Logs out of Administrator Mode and
returns to User Mode.
PAPER MENU - PAPER
SOURCE - TRAY CHAINING
PAPER MENU - PAPER
SOURCE - TRAY MAPPING
Physical Tray 3, Physical Tray 4
Physical Tray 2 (other)
PAPER MENU - PAPER
SOURCE - TRAY MAPPING
183