Zeiss Optical Inserts Readers Instructions For Use page 2

�� Installation and use
Before the installation, read the ZEISS Optical Inserts instructions
to ensure safe use and check the orientation marks
on the side of the ZEISS Optical Inserts. With the help of the
ZEISS Optical Inserts marked left
installation in Apple Vision Pro.
Get started:
1. Place each ZEISS Optical Insert into position over the displays.
ZEISS Optical Inserts will snap in magnetically when properly
attached over the Apple Vision Pro displays.
2. If prompted, scan the code included on the card to pair your
Apple Vision Pro to the ZEISS Optical Inserts.
3. If necessary, the system may prompt you to swap to the ⊕ Light
Seal Cushion which is provided separately in the Apple Vision Pro
kit. The Light Seal Cushion is designed to maintain the appropriate
fit of Apple Vision Pro. Consult the Apple Vision Pro User Guide for
further instructions.
To safely remove the ZEISS Optical Inserts from your Apple Vision Pro,
press your fingertip into the indentation on the side and gently lift
the insert out.
�� Maintenance and cleaning
CAUTION | Product Damage
1. ZEISS Optical Inserts need to be fully dry before inserting into
Apple Vision Pro.
If ZEISS Optical Inserts are not clean, or are damp or wet,
the proper use of ZEISS Optical Inserts may be impaired.
This can lead to product damage.
• Ensure ZEISS Optical Inserts are fully dry and clean before
inserting into Apple Vision Pro.
2. Remove ZEISS Optical Inserts from Apple Vision Pro for cleaning.
Do not clean ZEISS Optical Inserts while they are inserted in
Apple Vision Pro. Improper cleaning can cause product damage.
• Gently remove the ZEISS Optical Inserts from your
Apple Vision Pro before cleaning.
4. Gently dry with dry side of microfiber cloth.
Ensure ZEISS Optical Inserts are fully dry before inserting
into Apple Vision Pro.
Without ZEISS cleaning solutions
1. Rinse ZEISS Optical Inserts under lukewarm water.
2. Use a pH-neutral cleaning agent.
3. Gently dry with a clean microfiber cloth.
Ensure ZEISS Optical Inserts are fully dry before inserting
into Apple Vision Pro.
�� Troubleshooting
Issue(s):
• My vision is blurred, not sharp or unclear.
• I perceive visual discomfort.
Try this:
• Double check if you are using ZEISS Optical Inserts with your correct
spectacle lens prescription.
• Check if ZEISS Optical Inserts are clean, dry and free of dust and dirt.
• Ensure that ZEISS Optical Inserts are installed properly.
• Check if your spectacle lens prescription may have changed. Please
contact your optician for more information.
�� Packaging label
ZEISS Optical Inserts
Readers
von/de +0.75 bis/à +1.25D
Optische Einsätze für Apple Vision Pro
mit einer vordefinierten optischen Stärke.
Ausschließlich entwickelt, um klares
Sehen beim Tragen der Apple Vision Pro
zu gewährleisten. Die Optical Inserts sind
kein Ersatz für Korrektionsgläser; nur durch
eine professionelle Augenuntersuchung
kann der Gesundheitsstatus Ihrer Augen
sowie Ihr Sehvermögen bestimmt werden.
Enthält zwei optische Einsätze.
Les inserts optiques de l'Apple Vision Pro
sont dotés d'une correction optique
prédéfinie.
Conçus pour offrir une vision claire,
lorsqu'ils sont portés avec l'Apple Vision Pro.
Ces inserts optiques ne sont pas destinés à
remplacer des verres correcteurs. Seul un
examen professionnel des yeux peut
déterminer l'état de santé de vos yeux et vos
besoins en matière de vision.
Contient une paire d'inserts optiques.
Made in China/Fabriqué en Chine
Carl Zeiss Vision (China) Ltd.
1636 Zhishi Dadao, Huangpu District
VRC-510555 Guangzhou, P.R. CHINA
Carl Zeiss Vision International GmbH
Turnstrasse 27
73430 Aalen, Germany
zeiss.com/vision-care
Carl Zeiss Vision International GmbH
Turnstrasse 27
73430 Aalen, Germany
zeiss.com/vision-care
EN_20_070_0054I V.5 I Printed in China CZ-04/2024
�� ��
�� ��
and right , ensure proper
�� Storage
When ZEISS Optical Inserts are not inserted in Apple Vision Pro, store
ZEISS Optical Inserts safely to prevent scratches and other damage
to the product.
CAUTION | Product Damage
1. ZEISS Optical Inserts are not suitable for extreme temperatures.
Storing ZEISS Optical Inserts at temperatures above 45°C / 113°F
(e.g., on the dashboard of a car in summer or in a sauna) can
cause damage to ZEISS Optical Inserts.
• Do not expose ZEISS Optical Inserts to extreme temperatures.
2. ZEISS Optical Inserts are not suitable for extreme temperature
and humidity fluctuations.
ZEISS Optical Inserts should not be exposed to extreme
temperature and humidity fluctuations. This can cause damage
to ZEISS Optical Inserts.
• Do not expose ZEISS Optical Inserts to sudden temperature
or humidity changes.
3. Use only described cleaning methods and agents to safely clean
ZEISS Optical Inserts.
Improper cleaning can cause product damage.
• Do not use any cleaning methods and / or agents not described
in this chapter.
ZEISS Lens Wipes
1. Lightly brush away dust and dirt with the folded ZEISS Lens Wipe.
2. Unfold the ZEISS Lens Wipe and gently clean the surface using
circular movements until clean and dry.
3. Ensure ZEISS Optical Inserts are fully dry before inserting into
Apple Vision Pro.
ZEISS Cleaning Spray
1. When heavily soiled, rinse ZEISS Optical Inserts under
lukewarm water.
2. Apply ZEISS Cleaning Spray.
3. Use a clean microfiber cloth to gently clean the surface
with circular movements.
�� Technical information
Refractive
1.67
index
Coating
Functional multicoat
Refractive
ZEISS Optical Inserts Readers are available for three refraction ranges.
range The refraction range on the label provides information to guide the user
to which version to choose depending on individual need, to ensure
the best visual experience with Apple Vision Pro. The optical insert
respective refractive power in diopters (in relation to the refractive range
on the label) is provided as follows:
Refractive range
on the label
+0.75 to +1.25D
+1.50 to +1.75D
+2.00 to +2.75D
�� Warranty
ZEISS Optical Inserts are provided according to applicable contractual
terms agreed with you, including applicable warranty terms.
�� Disposal and recy cling
When this product reaches its end of life, dispose of it as instructed
by your local authorities. According to local, state and federal law
regulations, it is necessary to dispose of your product (packaging
waste and ZEISS Optical Inserts) separately. Proper disposal will
help conserve natural resources and protect both public health
and the environment.
�� Contact information
Incident reporting and complaints:
For reporting an incident, causing injury from ZEISS Optical Inserts
contact: Germany : https://www.zeiss.de/zeiss-optical-inserts-support
France: qualite-ar.vision.fr@zeiss.com
Legal Manufacturer
Carl Zeiss Vision International GmbH
Turnstrasse 27
73430 Aalen, Germany
zeiss.com/vision-care
For support and service view:
https://support.apple.com/guide/apple-vision-pro
Refractive range Refractive power
engraved on product in the product
0.75—1.25D +0.25D
1.50—1.75D +0.50D
2.00—2.75D +0.75D