Download Print this page

Unicol CP1 Manual

Ceiling plate

Advertisement

Quick Links

01865 767676
sales@unicol.com
www.unicol.com
CP1 / CP2 / CP3 / CP4 / CP5 / CP6
CP8 / CP9 / CPAV1
Screen Size: n/a
Guide Max. Weight: variable
Revised 13/08/24
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for pinch
points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring
loaded parts. Before installing, make sure that the supporting surface will support five times the combined
load of the solution and the hardware. Never exceed the maximum load capacity. Please also layout all
components to ensure that you have all of the required parts before proceeding (see BOM list on following
page). Use of this product for anything other than its specified use may result in failure or personal
injury. This product is intended for indoor use only. We recommend using a qualified trades person for
installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the CP1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Unicol CP1

  • Page 1 01865 767676 sales@unicol.com www.unicol.com CP1 / CP2 / CP3 / CP4 / CP5 / CP6 CP8 / CP9 / CPAV1 Screen Size: n/a Guide Max. Weight: variable Revised 13/08/24 *Please check model specific details before installing* WARNING Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier claims agent and do not continue the installation until it has been reviewed.
  • Page 2 Pozi Head Screwdriver 19mm Spanner 17mm Spanner COMPONENTS DESCRIPTION CP1 | Standard Ceiling Plate CP2 | Large Standard Ceiling Plate CP3 | Stub Column Ceiling Plate CP4 | Large Stub Column Ceiling Plate CP5 | Gantry Ceiling Plate CP6 | Tilting Ceiling Plate...
  • Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 (CP5) STEP 1 (EXC. CP5 & CPSC1) Using the 4 ceiling mounting slots, as shown above, Using the 8 ceiling mounting slots, as shown above, determine where you want to install your mount, determine where you want to install your mount, mark it and fix into position.
  • Page 4 01865 767676 sales@unicol.com www.unicol.com CP6 TILT ADJUST CP9 SWIVEL ADJUST To adjust the angle of the CP6, slightly loosen the The CP9 offers 360 swivel as standard. When it connecting bolt and move the socket to the correct arrives it will have been tightened with an impact angle.

This manual is also suitable for:

Cp2Cp3Cp4Cp5Cp6Cp8 ... Show all