Related Manuals for Knuth 109540
Summary of Contents for Knuth 109540
- Page 1 ROTARY ARBOR PRESS OPERATING INSTRUCTIONS ENGLISH Item no. 109540 DDP_5T_BA_EN_V1.0_202302 KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland...
-
Page 2: Table Of Contents
Obligation of the operator 4.6 Requirements for the personnel 4.7 Intended use 4.8 Prohibited and potentially dangerous applications 4.9 Further safety regulations 4.9.1 Accident prevention regulations 4.9.2 Guidelines of the employers‘ liability insurance association Further notes 5.1 Transport damage 5.2 Subject to change Assembly and parts list Imprint KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland... -
Page 3: General Note
[mm] 50 x 50 x 645 Outreach [mm] Pressing force [kN] Dimensions (LxWxH) [mm] 640 x 370 x 820 Weight [kg] Item no. 109540 KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland... -
Page 4: Preface
All information in these operating instructions refers to the machine with the serial number on the cover sheet of these operating instructions. For your own safety, the machine must not be put into operation until the personnel carrying out the work have carefully read and understood these operating instructions and have familiarised themselves with all the functions of the machine. Operating and maintenance work must only be carried out in accordance with these operating instructions. We accept no liability for damage caused by improper work. Safety signs Observe the following safety signs and their meaning in order to avoid light to serious injuries and damage to the machine. You will find these safety signs both in the opera- ting instructions and on the machine itself. Note General hazard warning Follow instructions Danger of hand injuries Wear safety shoes Wear protective clothing Use gloves KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland... -
Page 5: Hazard Warnings
DANGER This hazard warning indicates an imminently hazardous situation. Failu- re to comply with the notice may result in serious injury or death if the situation is not avoided. WARNING This danger notice indicates a potentially dangerous situation. Failure to follow this warning may result in serious injury or death if the situation is not avoided. CAUTION This danger notice indicates a potentially dangerous situation. Failure to comply with the notice may result in minor or slight injury if the situation is not avoided. NOTE This notice indicates a potentially dangerous situation that may result in damage to the machine if the situation is not avoided. Other dangers The machine is equipped with several protective devices. There is danger to the user if the machine is used in a prohibited or dangerous manner. Danger may arise from the machine if: - information in these operating instructions is not observed, - personnel without sufficient expertise work on the machine, - the machine is used improperly. KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland... - Page 6 Keep your work area tidy. Disorder in the work area results in accident hazards. Always ensure that the working area is free of chips and other impurities. To remove chips, please use suitable aids such as chip hooks, magnets or similar. Keep the working area free of obstacles. Check your machine for damage and changes. Before each use of the machine, check the proper and intended function of the safety devices. Check the function of all moving parts, or that they are not jammed or that parts are da- maged. All parts must be correctly assembled and fulfil all conditions to ensure proper operation of the machine. Immediately report any changes to the machine that affect safety and do not operate it. Damaged guards and parts must be properly repaired or replaced by our customer ser- vice or by qualified personnel. Keep unauthorised persons away Ensure that there are no other persons in the working area who could be endangered. Children and visitors should always be kept at a safe distance from the work area. Keep children away. Secure workshop and work area from unauthorised entry. Take care of your tools with care. Keep your tools sharp and clean to work well and safely. Follow the maintenance inst- ructions and the instructions for changing tools. Keep handles dry and free from grease and oil. Alcohol, medication, drugs Never operate the machine under the influence of alcohol, medication or drugs. KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland...
- Page 7 DATUM 2023.2 VERSION Wear suitable work clothes. Do not wear loose clothing, watches or jewellery. For your own protection, wear non- slip safety shoes and gloves when working. If you have long hair, wear a hair net. Take care of your hands. Clamp tools and workpieces properly. Always use a vice or clamping device to hold the tool or workpiece. Do not reach into the working area of the machine. KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland...
-
Page 8: Obligation Of The Operator
- Repairs may only be carried out by authorised and instructed persons. - Clean the machine regularly and store it safely. Date: Person responsible for the work area: Signature of responsible person KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland... -
Page 9: Requirements For The Personnel
For the safe and proper use of the machine, the user must meet the following requirements: 1. physical and mental fitness of the user 2. knowledge and understanding of the operating instructions 3. users who have physical, sensory or mental limitations must not operate the machine without the supervision of an instructed, responsible person. 4. persons who have not been instructed must be kept away from the machine. Intended use Only use the machine in compliance with the technical data in these operating instructions. This machine is intended exclusively for cold forming of metals with suitable simple or compound tools. The machine may only be operated in technically perfect condition and must be shut down immediately in the event of defects that have an influence on safety. Prohibited and potentially dangerous applications Avoid overloading the machine due to improper use. This can cause damage to the machine and endanger the operator. All work, manipulations or changes to the safety devices are prohibited. Do not dismantle any safety devices or put them out of operation! Repair and maintenance work must be carried out by Knuth service technicians or by qualified specialists. Safety devices may be dismantled for repair and maintenance work. After completion of the repair and maintenance work, all safety directions must be reassembled and their function checked. The machine can then be put back into operation. KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland... -
Page 10: Further Safety Regulations
VERSION Further safety regulations Regulations and directives The following regulations and directives must be observed during transport, installation, opera- tion, maintenance and repair of the machine: - Accident prevention regulations - Guidelines of the employers‘ liability insurance association 4.9.1 Accident prevention regulations The respective accident prevention regulations must be available for general inspection in every company. 4.9.2 Guidelines of the employers‘ liability insurance association Employer‘s Liability Insurance Association guidelines are issued by the Employer‘s Liability Insu- rance Association responsible for the individual company. Further notes Transport damage Check that the machine and accessories are intact and complete. Transport damage must be noted on the carrier‘s consignment note and reported to us. Complaints must be reported to the supplier immediately, stating the machine number. Subject to change Due to continuous improvement and further development of our machine, it is possible that individual descriptions as well as technical data deviate from those of the delivered machine. KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland... -
Page 11: Assembly And Parts List
Ring Handle Plate Spring pin Cover ⑯ Washer Rack Locking pin ⑮ ① ② ③ ⑭ ④ ⑬ ⑤ ⑫ ⑪ ⑩ ⑨ ⑧ ⑥ ⑦ KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland... -
Page 12: Imprint
DATUM 2023.2 VERSION Imprint KNUTH Werkzeugmaschinen GmbH Schmalenbrook 14 D-24647 Wasbek Telefon +49 (0)4321 – 609 0 Telefax +49 (0)4321 – 689 00 E-Mail info@knuth.de Geschäftsführer: Karsten Knuth, Philip Knuth, Kristian Knuth Handelsregister: HRB 1554 USt.-IdNr.: DE 214088559 KNUTH Werkzeugmaschinen GmbH • Tel. +49 (0)4321 / 609-0 • info@knuth.com • www.knuth.com • Facebook: KNUTH.Deutschland...
Need help?
Do you have a question about the 109540 and is the answer not in the manual?
Questions and answers