Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ryobi RCWB18X
Summary of Contents for Ryobi RCWB18X
- Page 1 FRONT PAGE RCWB18X...
-
Page 2: Intended Use
■ If operating a power tool in a damp location is IMPORTANT! unavoidable, use a residual current device (RCD) It is essential that you read the instructions in this manual protected supply. Use of an RCD reduces the risk of before assembling, operating, and maintaining the electric shock. -
Page 3: Additional Safety Warnings
of parts and any other condition that may affect the ■ Wear eye protection and ear protection. Adequate power tool’s operation. If damaged, have the power protective equipment will reduce the risk of personal tool repaired before use. Many accidents are caused injury. -
Page 4: Transportation And Storage
■ Do not use the product near open windows. from corrosive agents, such as garden chemicals and de-icing salts. Do not store the product outdoors. ■ Use the full blower nozzle extension so that the air stream can work close to the ground and perform ■... -
Page 5: Symbols In This Manual
Rotating fans. Keep hands and feet out of openings while the product is running. Remove the battery pack before starting any work on the product. Wear eye and ear protection. Wear appropriate respiratory mask. Do not expose the product to rain or damp conditions. - Page 6 RCWB18X Upper blower tube Lock-out button On/Off trigger Lower blower tube Round nozzle Flat nozzle Operator's manual Battery pack Charger Know your product...
- Page 7 Wear eye and ear protection and Insert the round or flat nozzle into the lower blower tube. Turn the nozzle clockwise appropriate respiratory mask at all to secure it. Insert the lower blower tube into the upper blower tube. Turn the lower times while operating the product.
- Page 8 Cleaning the Using the product p.11 product Storing the p.12 product...
-
Page 9: Using The Product
USING THE PRODUCT WARNING: Keep hands away from the lock-out button and the on/off trigger when installing the battery pack to avoid starting the product accidentally. 1. Perform one of the following: Insert the round or flat nozzle into the lower blower tube. Turn the nozzle clockwise to secure it. - Page 10 3. Squeeze the on/off trigger to power on the product. Press the lock-out button for continuous function of the product. NOTE: Operate product recommended position as shown. Always hold the product by the designated handle. Operation...
-
Page 11: Cleaning The Product
CLEANING THE PRODUCT 1. Press the latch on each side and remove the battery pack. 2. Clean the product with a soft, dry brush. WARNING: Do not use water to clean the product. Maintenance... -
Page 12: Storing The Product
STORING THE PRODUCT 1. Press the latch on each side and remove the battery pack. 2. Turn round flat nozzle counterclockwise to remove it from the lower blower tube. 3. Turn lower blower tube counterclockwise to remove it from the upper blower tube. -
Page 13: Product Specifications
Organisations have legal responsibilities to Cordless blower protect the health of their workers. Techtronic Industries Model RCWB18X Australia Pty Ltd, (ACN 002 277 509) (TECHTRONIC) considers the safety of all users of our products to be of Rated voltage 18 V d.c. - Page 16 Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 961087707-01...
Need help?
Do you have a question about the RCWB18X and is the answer not in the manual?
Questions and answers