Displaying The Menu - JVC DT-V1710CG/E Instructions Manual

BASIC MENU OPERATIONS
(MAIN MENU, SETUP MENU)

DISPLAYING THE MENU

SCREENS
To display MAIN MENU
Press the MENU button on the front panel.
To display SETUP MENU
Press the button while pressing the
panel.
NOTES:
• To exit the MENU, press the MENU button several times.
• The MENU automatically exits about 30 seconds after the last Menu
operation.
• To go back the previous MENU, press MENU.
MENU OPERATION
PROCEDURE
Example: Adjusting the "BRIGHT" value to "+10".
1.Press the button while
"SETUP MENU" is displayed on the screen.
2. Select "PICTURE SUB ADJ." by pressing the
button, then press the
"PICTURE SUB ADJ." menu is displayed on the
screen.
3. Select "BRIGHT" by pressing the
4. Press the and/or
as required to obtain the brightness desired.
Example: Setting brightness to "+10".
5. Delete the "SETUP MENU" by pressing the
MENU button several times.
14
button on the front
button is pressed.
button.
button .
buttons as many times
(cont'd)
About " sub menu"
Only displays selected items. (sub-menu display) Allows
you to adjust and set items while looking at the actual
screen.
NOTE:
• This function is available only when "
MENU.
Example: Setting an item in the "PICTURE SUB ADJ."
with the sub-menu.
1. Press the button while
"SETUP MENU" is displayed on the screen.
2. Select "PICTURE SUB ADJ." by pressing the
button, then press the
3. Select " sub menu" by pressing the
several times, then press the
The adjustment bar is displayed at the bottom or top
of the screen.
4. Select the desired setup item by pressing the
and buttons (several times).
5. Press the and/or
as required to obtain the desired setting.
To delete the sub-menu display:
Press the MENU button on the front panel.
• The previous MENU display is restored.
To change the position of the sub-menu display
1. Display the "MAIN MENU" by pressing the MENU button.
2. Select "sub menu POSITION" by pressing the
several times.
3. Set "UPPER" or "LOWER" by pressing the
buttons.
About "reset"
Restores all MENU settings (currently displayed) to
factory-preset values.
Select "reset" using the
button.
NOTE:
• This function is only available when "reset" is displayed in the
MENU.
sub menu" is displayed in the
button is pressed.
button.
button
button.
buttons as many times
button
and
[UPPER]
[LOWER]
/ buttons, then press the