Playback Features - JVC TH-M65AS Instructions Manual

Playback
NOTE
• You can change the time information mode. (A pg. 33)
• You can also check the playback information on the TV screen.
(A pg. 32)
Disc information on the display window
The disc indicators on the display window show the current status
of the corresponding disc tray.
Example: When the discs are loaded to disc trays 1, 2 and 5, and the
disc in the disc tray 5 is selected.
Currently loaded disc numbers
About the disc lamps
The disc lamps on the center unit also show the disc status.
Disc
Loaded
Selected
No disc
NOTE
When loading a disc;
• Only after a DISC button is pressed the system starts reading the
information of the disc on the specified tray. After that, the disc
indicators/lamps show the current disc status correctly.
Tray lock
You can lock trays and prohibit the unwanted disc ejection by
children.
On the center unit ONLY:
While the system is turned off
Press and hold , then press
• The system turns on and "LOCKED" appears on the display
window.
• If you try to eject discs, "LOCKED" appears and indicates that
trays are locked.
To unlock trays
When the system is turned off, press and hold
DISC 1.
• The system turns on and "UNLOCKED" appears on the display
window.
Currently selected disc
number ( appears beside
the disc number)
Lamp
Red
Green
Off
for DISC 1.
, then press

Playback features

IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
Remote control
mode selector
for
One Touch Replay
You can move back the playback position by 10 seconds
from the current position.
During playback
On the remote control:
Press .
NOTE
• This function works between chapters in the same title.
• This function may not work for some DVDs.
(play button)
Number
buttons
24