JVC KD-AVX2 Instructions Manual page 13

3 Finish the procedure.
ENT
Lights up when "Local" mode is activated.
Only stations with sufficient signal strength
will be detected.
To tune in to all receivable stations, repeat the
same procedure to set "DX / Local" to "DX".
The LO indicator goes off and the DX indicator
lights up.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential Memory)
After selecting the FM band (FM1 – FM3) you
want...
1
MENU
2
Select "Mode", then "SSM".
3
ENT
"SSM" is shown until automatic presetting
is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
Manual presetting
After tuning in the station you want to preset...
1
MENU
2
Select "List", then a preset number
(1–6) you want to store the station
into.
• You can also display the list by pressing and
holding 5/∞ buttons.
3
ENT
Stored preset number flashes for a while.
How to exit from menus or lists
SRC
Menu or list operations are canceled and the
screen returns to the source screen.
EX.: Storing 92.5
MHz into preset
number 4 of FM1
D DISP
13