JAMES MARTIN VANITIES 883-V24-GW Assembly/Installation Instructions

Page: 1 o f 11
Columbia Series Vanity: 883-V24-AGR 883-V24-GW 883-V24-LTO
Columbia Series Metal Bases: 883-B24-BNK 883-B24-MBK 883-B24-RGD
Assembly/Installation Instructions
For your safety and to achieve the best possible installation of this cabinet,
James Martin Vanities always recommends you consult with a professional contractor.
Two people are required for the assembly and installation of these cabinets.
Important Notes: This vanity cabinet may be used freestanding, or may be mounted to a wall (floating). If
you are using this cabinet as a freestanding unit with the stainless steel base, please follow the
instructions on pages 06 - 1 1 *.
If you are using this cabinet as a wall mounted (floating) unit, please refer to pages
Door Pulls:
Three colors of door pulls (BNK Brushed Nickel)/ (MBK Matte Black)/ (RGD Radiant Gold) are included
with the cabinet, so you may choose the color which best suits your room.
Wood Shelf for Metal Base:
The wood shelf used on the optional metal base ships separately.
Materials
for
Installation:
A pre-attached metal mounting (French Cleat) brackets
= =
I
back of vanity cabinet
Step 1 Notes:
The metal mounting brackets have been
pre-installed to the backside of the cabinet
16" from the bottom of the cabinet, remove
one piece from the back of the cabinet .
For Warranty information, please visit jamesmartinvanities.com
Customer Service: 512-795-4171
Level
a
= = =
I
B
(0
J
T"'""
JAMES 1\1\ARTIN
I
�
Tape
Measure
0)
C\J
Step 2 Notes:
Draw a horizontal line on the wall at your desired
height. For this cabinet, most people use a
height of 29"
®
VA N I T I ES
01 - 05
* .
Pencil
,,. - - - -
--, - - -- - '
......
I
I
I
I
I
,.. -t
,.. ...- I
Wall
Version:202311
I