JVC Everio GZ-HM860 User Manual page 46

Recording
Operation Buttons for Still Image Recording
.
Operation
Button
Face Short Cut
A
Menu Button
T/W Zoom
B / C
Recording/
D
Playback Mode
Snapshot
E
Q
MENU
F
Display Button n
G
46
Description
Displays a short cut screen of face
recognition functions.
"Operating the Face Short Cut Menu"
(A p. 122)
Allows the same functions as the zoom
lever to be performed.
Camera shake that often occurs when
using the zoom lever can be minimized.
"Zooming" (A p. 47)
Switches between recording and playback
modes.
Functions as the SNAPSHOT button.
However, focus cannot be set by pressing
halfway.
Displays the various menus of still image
recording.
"Operating the Menu" (A p. 121)
Some displays disappear after
approximately 3 seconds.
Use the n button to change the displays as
shown below.
Tap n button
0
Displays appear for approximately 3
seconds with every tap.
Tap and hold n button
0
Displays are fixed such that they do not
disappear. After setting, the display
button changes from n to m.
Tap m to release the displays.
Useful Settings for Recording
When "AUTO POWER OFF" is set to "ON", this unit turns itself off
0
automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
"AUTO POWER OFF" (A p. 146)
When "TOUCH PRIORITY AE/AF" is set to "FACE TRACKING", this unit
0
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
"Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)" (A p. 61)
Caution :
Do not expose the lens to direct sunlight.
0
Do not use this unit in the rain, snow, or places with high humidity like the
0
bathroom.
Do not use this unit in places subject to excessive humidity or dust, as well
0
as places exposed to steam or smoke directly.
Do not remove the battery pack, AC adapter, or SD card when the access
0
lamp is lighted. The recorded data may become unreadable.
"ACCESS (Access) Lamp" (A p. 156)
This unit is a microcomputer-controlled device. Electrostatic discharge,
0
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.
Memo :
Before recording an important scene, it is recommended to conduct a trial
0
recording.
The digital image stabilizer does not work when recording still images.
0
Depending on the shooting conditions, the four corners of the screen may
0
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.