JVC Everio GZ-HD10 Manual Book page 27

Menus
APERTURE PRIORITY
You can add a blurring effect to
the background by setting the
aperture value (F-number).
* mode only
WB
Adjusts the white balance to
achieve the optimum colors
for the amount of light in your
surroundings during recording.
EFFECT
Enables you to record videos or
still images with special effects.
TELE MACRO
Enables you to shoot a
subject as large as possible
at a distance of approx. 70 cm
(2.30 ft).
ZEBRA*
The sections of the
photographic subject that
are refl ected as white due to
light are displayed in a striped
pattern. Use this as a guide for
adjusting the brightness.
* mode only
SHARPNESS*
Adjusts the enhancement level
of the outline of the recorded
image.
* mode only
Settings: [ ] = Factory-preset
[AUTO] : The aperture value is adjusted automatically.
F1.9 to F4.0 : The lower the F-number (larger aperture value),
the more blurred the background will become. The higher
the F-number (smaller aperture value), the clearer the
focus will be for both near and far objects. Move the set
lever to / to set the value.
NOTE
If the image is too bright, set to a larger F-number. If the image is
too dark, set to a smaller F-number.
[AUTO] : White balance is adjusted automatically.
MWB : Adjusts the white balance manually depending on
the light source.
1) Hold a sheet of plain white paper in front of
the subject so that the white paper fi lls the
screen.
2) Press and hold the set lever until the
indicator starts blinking then stops blinking.
FINE : When shooting outdoors on a sunny day.
CLOUD : When shooting outdoors on a cloudy day.
HALOGEN : When a video light or similar type of lighting is
used.
[OFF] : No effect is used.
SEPIA : The image has a brownish tint like old photos.
MONOTONE : The image becomes black and white like old
movies.
CLASSIC FILM* : This effect skips frames to give images of
an old movie atmosphere.
STROBE* : The image looks like a series of consecutive
snapshots.
[OFF] : Deactivates the function.
ON : Activates the function.
[OFF] : Deactivate this function.
70% : Sections that are close to being refl ected as white (bright)
are displayed in a striped pattern.
100% : Sections that are completely refl ected as white (too
bright) are displayed in a striped pattern.
Adjust the sharpness moving the set lever to
down.
NOTE
Enhancing the sharpness causes the recorded image to appear
grainy.
/ , then press
27
EN