Adding Or Changing A Channel Label; Checking The Dtv Signal Strength - Insignia NS-L19X-10A User Manual

NS-L19X-10A_09-0241_MAN_V2_English.book Page 21 Tuesday, April 7, 2009 9:29 AM
3 Press or to highlight Favorites, then press
ENTER. The Channels - Favorites menu opens.
PICTURE AUDIO
Channels
• Favorites
Ch 1.2 Sencore
Ch 2.1 WGBH-SD
Ch 2.10 WGBH-DX
Ch 6.0
Ch 12.0
OK
MOVE SELECT
ENTER
Add channels to create a favorite list
4 Press , , or
want to add to your Favorites list, then press
ENTER. To remove the channel from your
Favorites list, remove the checkmark.
Note
If the list has more than one page, press
scroll through the pages.
5 Press EXIT to close the menu.
6 To select a channel in the favorite channel list,
press FAVORITE, press
channel, then press ENTER.

Adding or changing a channel label

If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also
relabel a channel that is already labeled.
To label a channel:
1 Press MENU. The on-screen menu opens.
PICTURE
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
MOVE OK SELECT
ENTER
Adjust settings to affect picture quality
2 Press or to highlight CHANNELS, then
press or ENTER. The Channels menu opens.
PICTURE AUDIO
Channels
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
Auto Zoom
MOVE OK SELECT
ENTER
Create labels for channels, up to 10 characters
CHANNELS SETTINGS RADIO
Ch 2.0
Ch 2.2 PBS-HD
Ch 4.0
Ch 7.0
Ch 14.0
PREVIOUS EXIT
MENU EXIT
to highlight the channel you
or to
or to highlight the
AUDIO CHANNELS SETTINGS RADIO
Standard
70
40
60
0
-16
PREVIOUS EXIT
MENU EXIT
CHANNELS SETTINGS RADIO
Off
Off
PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com
3 Press or to highlight Channel Labels, then
press ENTER. The Channels - Channel Labels
screen opens with the channel number field
highlighted.
PICTURE AUDIO
Channels
• Channels labels
1.2
OK
MOVE SELECT
ENTER
Create labels for channels, up to 10 characters
4 Press or to select the channel number you
want to label, then press
channel label field.
5 Press or to select a character, then press
or to move to the next position. Repeat this
step to add more characters (as many as 10).
6 When the label is complete, press ENTER, then
confirm when the confirmation box opens.
7 Press EXIT to close the menu.

Checking the DTV signal strength

You can check the DTV signal strength to determine
if you need to adjust your antenna or digital cable
input. The higher the signal strength, the less likely
you are to experience picture degradation.
To check the DTV signal strength:
1 Press MENU. The on-screen menu opens.
PICTURE
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
MOVE OK SELECT
ENTER
Adjust settings to affect picture quality
2 Press or to highlight CHANNELS, then
press or ENTER. The Channels menu opens.
PICTURE AUDIO
Channels
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
Auto Zoom
MOVE OK SELECT
ENTER
Display signal strength of selected digital channels.
CHANNELS SETTINGS RADIO
S e n c o r e
PREVIOUS EXIT
MENU EXIT
to move to the
AUDIO CHANNELS SETTINGS RADIO
Standard
70
40
60
0
-16
PREVIOUS EXIT
MENU EXIT
CHANNELS SETTINGS RADIO
Off
Off
PREVIOUS EXIT
MENU EXIT
21