North Light OCL-0995F Quick Start Manual

Floor light
Please read the entire instruction manual before use and
then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Safety
Warning:
• The mains lead should be checked regularly. Never use
the product if the mains lead or plug is damaged.
• If the mains lead has been damaged, it must only be
replaced by the manufacturer, authorised service facility or
qualified tradesman. This is to prevent the risk of electric
shock or fire.
This product is intended for indoor use only.
Class II luminaire.
Care and maintenance
Switch the lamp off and clean it using a soft, dry cloth.
Responsible disposal
This symbol indicates that this product should
not be disposed of with general household
waste. This applies throughout the entire EU. In
order to prevent any harm to the environment
or health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling
the product, take it to your local collection
facility or contact the place of purchase. They
will ensure that the product is disposed of in
an environmentally sound manner.
Installation
1. Screw the tubes (1) and (2) together.
2. Screw the tube to the base plate (3).
3. Unscrew the shade ring (a) and
thread the lamp shade over the
socket.
4. Screw the shade ring back to
secure the lamp shade.
5. Install the light bulb, 1 x E14 max
30 W (sold separately), into
the socket of the lamp holder.
6. Plug the mains lead into a wall
socket.
7. The lamp is switched on and off with
the floor switch (4).
4
Art.no 36-9859 Model OCL-0995F
Specifications
Rated voltage
Base
a
Light source
Mains lead
Size
1
2
3
ENGLISH
220–240 V AC, 50 Hz
E14
1 x E14 max 30 W (sold separately)
2 m
höjd 1200 mm, Ø 180 mm