North Light Moon Instruction Manual

Moon Wall Light
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Safety
• The light bulb in this product must only be replaced by
the manufacturer, a qualified service facility or a qualified
technician.
• The product must only be used with the supplied mains adapter.
The product is intended for indoor use only.
Assembly
1. Before drilling and screwing, make sure that the wall is free
from electrical wiring and water pipes.
2. Mark out on the wall where you
need to drill or screw.
Use an appropriate fastening
method for the substrate material
in question.
3. Screw a screw into the wall, but leave enough protruding
to hang the light on.
UNITED KINGDOM • CUSTOMER SERVICE
Tel. 020 8247 9300 E-mail: customerservice@clasohlson.co.uk Internet: www.clasohlson.co.uk Postal: 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
Art.no 36-7539
4. Set the function selector to the desired mode:
- ON: The light will shine steadily until you turn it off.
- 20Min: Sleep timer mode, the light will gradually dim
and will turn off automatically after approx. 20 minutes.
5. Connect the mains adapter to the DC connection and then
to a wall socket.
6. Hook the light onto
the screw in the wall and
then switch it on using
the on/off switch.
7. Turn on the wall light using
the in-line switch.
The power to the light must be disconnected in order to
activate the sleep timer.
Example:
1. To change function, turn off the wall light using the in-line
switch. Select the function ON or 20Min (sleep timer) and
then turn on the light again with the in-line switch. If you
selected ON the light will shine with a fixed glow until you
turn it off with the in-line switch. If you selected 20Min,
the light will shine for 20 minutes and then gradually dim.
Model K-MWL-RN5W
2. If you change the function from ON to 20Min when
the light is on, the sleep timer will not be activated.
Turn off the light, set the function switch to 20Min and
turn on the light. The sleep timer has been activated.
3. If you have selected sleep timer and the light has dimmed
completely you must disconnect the power with the switch
and then turn on the light again to reactivate the sleep timer.
Care and maintenance
The light should be cleaned using a dry cloth or vacuum cleaner.
Responsible disposal
This symbol indicates that this product should
not be disposed of with general household
waste. This applies throughout the entire EU.
In order to prevent any harm to the environment
or health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling
your product, take it to your local collection
facility or contact the place of purchase. They
will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Mains adapter
Input 100–240 V AC, 50/60 Hz, 0.15 A
12 V DC, 0.5 A
Output
Luminous flux 180 lm
Dimensions Diam 30 cm
Mains lead
ENGLISH