Page 8
S6000TL-S10000TL Model S6000TL Weight 11KG Model S8000TL Weight 11KG Model S10000TL Weight 11KG 373.5 127.0 468.0...
Page 9
The number of S3600TL-S6000TL is two The number of S3600TL-S6000TL is two...
Page 10
The installation of the inverter should be proteccted under shelter from direct sunshine or any bad weather conditions as shown below : × × No Direct Sunlight No Exposure to Rain and Snow Direct Sunlight Exposure to Rain and Snow...
Page 11
Inverter Take T series as an example Inverter three 38mm 38mm 2) Drill holes in the marked position as per the size of expansion screws. 3)Insert the expansion tubes into the hole,knock the tubes into the hole and make them level with the wall surface.
Page 12
Fig.3-8 The DC side terminals are shown in the following figure Fig.3-10...
Installation Steps After riveting the stripped wire to the insulation Insert the rubber core into the cable in line sequence, Holding the unlock button according to the logo Use a screwdriver to remove the red rings terminal, insert it into the lock nut and the main make the insulation terminal flush with the rubber core direction and reverse direction rotation nut on both sides...
Need help?
Do you have a question about the S6000TL and is the answer not in the manual?
Questions and answers