W A R N I N G
The cutting plates are very sharp. Use cau-
tion and wear cut resistant gloves when
handling the plates.
1) The CL 52 is fitted with a safety system that turns
the machine off when the pusher is turned out away
from the opening.
The machine will start again once the pusher is
swung back into place, over the feed opening. The
machine will also stop if the continuous feed lead or
lid latch is opened, and the green button must be
pressed to restart the unit.
If this system should ever fail, the machine should
be removed from use and serviced immediately.
2) The CL 52 is fitted with a temperature fuse that
automatically stops the motor if the machine is left
on for too long or overloaded. If this happens, allow
the machine to cool completely before restarting.
If the machine has become jammed press the off
button and UNPLUG the machine from the wall
outlet, and restart by first pressing the reset button
located on the bottom of the motor base. Then close
the lead / attachment, close the latch, and press the
on button.
SAFETY
W A R N I N G
Do not open the feed lead until the motor
has come to a complete stop.
Never tamper with or defeat the purpose of
the locking and safety systems.
Never place anything other than food pro-
ducts into the entry port.
Never put anything into the exit port.
Always use the food pushers to force the
food through the entry ports.
Do not overload the machine or apply
excess pressure with the food pushers.
9
Need help?
Do you have a question about the CL52 and is the answer not in the manual?