Robot Coupe D Series Quick Start Manual
Hide thumbs
Also See for D Series:
- Operating instructions manual (35 pages) ,
- Operation manual (24 pages) ,
- Manual (15 pages)
Related Manuals for Robot Coupe D Series
Summary of Contents for Robot Coupe D Series
- Page 1 CL 60 P.O. Box 16625, Jackson, MS 39236-6625 280 South Perkins St., Ridgeland, MS 39157 e-mail: robocoup@misnet.com - website: www.robotcoupeusa.com Phone : 1-800-824-1646...
-
Page 2: Table Of Contents
SUMMARY WARRANTY ASSEMBLY • Bulk feed head IMPORTANT WARNING • Whole head “Pusher” feed head • Tube feed heads INTRODUCTION TO YOUR USES AND CHOICE OF PLATES NEW VEGETABLE PREPARATION MACHINE CL 60 Series “D” CLEANING SWITCHING ON THE MACHINE MAINTENANCE •... - Page 3 ROBOT-COUPE U.S.A., . LIMITED WARRANTY by or as a result of failure to follow assembly, SHIPPING DAMAGE IS NOT COVERED BY YOUR NEW ROBOT-COUPE PRODUCT IS operating, cleaning, user maintenance, or stora- WARRANTY. Visible and hidden damages WARRANTED TO THE ORIGINAL PURCHASER ge instructions.
-
Page 4: Important Warning
W A R N I N G IMPORTANT WARNING KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you to use the equipment correctly. -
Page 5: Introduction To Your New Vegetable Preparation Machine Cl 60 Series "D
INTRODUCTION TO SWITCHING ON This head is not suitable for specific jobs such as : YOUR NEW VEGETABLE THE MACHINE - slicing long vegetables (which should be done using the specially-designed tube feed heads), PREPARATION MACHINE CL 60 Series ”D” - the preparation of bulky foodstuffs too big to be fed •... -
Page 6: Tube Feed Heads
The tubes can also be used as cutting guides for a) If you have opted for IMPORTANT : This feed head cannot be used for special preparations requiring high cutting precision a slicing, grating or making french fries and can therefore not be and a limited number of mis-cuts. -
Page 7: Whole Head "Pusher" Feed Head
Then, fit the correspon- 3) Screw the rubber agi- • WHOLE HEAD “PUSHER” FEED HEAD ding slicing plate onto the tator onto the motor To assemble the discharge plate, slicing, grating shaft. motor shaft. Rotate the or julienne disc or dicing equipment, follow the plate until the slot in the procedure for the automatic head in steps 1) and 2). -
Page 8: Tube Feed Heads
• TUBE FEED HEADS b) For the pusher-feed head : SLICING PLATES Lift the lever and turn it to the left so that the head 1) and 2) Follow the procedure for the bulk feed carrot / cabbage / cucumber / onion / potato / leek C444SA-1/32 can be tilted. -
Page 9: Cleaning
French fries can be made using a special attachment, 2) The CL 60 is fitted with a thermal safety device I M P O R T A N T available in two dimensions 8 x 8 mm and 10 x which automatically stops the motor if the machine is 10 mm. - Page 15 P.O. Box 16625, Jackson, MS 39236-6625 280 South Perkins St., Ridgeland, MS 39157 e-mail: robocoup@misnet.com website: www.robotcoupeusa.com Phone : 1-800-824-1646...
Need help?
Do you have a question about the D Series and is the answer not in the manual?
Questions and answers