Page 1
This manual provides the correct steps and care advice for a safe and long lasting installation. Manufactured from premium sanitary grade acrylic, Decina’s freestanding baths are easy to install, with adjustable self-supporting feet & can be freely located anywhere in your bathroom.
Page 2
Apply a thick bead of silicon around the bath base & the Install the vertical door seals along the whole height outlet. We recommend using a Decina OWA018 Pop down finished floor & allow it to set for 24 hours.
Page 3
*Warranty T&Cs apply. All dimensions are nominal & subject to manufacturing tolerances & may vary +/-5mm therefore we strongly recommend installation does not occur until after delivery. Decina reserves the right to modify or change models without notice. Please confirm all particulars with your sales consultant prior to purchase. For further information and for warranty T&C’s, please visit decina.com.au...
Need help?
Do you have a question about the LOLA LO1700W and is the answer not in the manual?
Questions and answers