Hitachi CP-SX635 User Manual – Operating Manual page 37

SETUP menu (continued)
Item
KEYSTONE
WHISPER
MIRROR
MONITOR OUT
Using the ▲/▼ buttons corrects the horizontal keystone distortion.
Shrink the right of the image ó Shrink the left of the image
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus), this
function may be excessive. This function should be used when the zoom
adjustment is set to the full WIDE (wide-angle focus) whenever possible.
• When the vertical lens shift is not set fully upward (not set fully
downward for the optional lens type FL-601 only (47)), this
function may not work well.
• This function will be unavailable when the Transition Detector is on (53).
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL ó WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
If the Transition Detector is TURN ON and MIRROR status is
changed, Transition Detector Alarm (53) will be displayed when
projector is restarted after the power switch is turned off.
The combination of a picture shown on screen and output from the
RGB OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the RGB
OUT port while an image from the port chosen in the (1) is on screen.
(1) Choose a picture input port using ▲/▼ buttons.
QUIT ó RGB1 ó RGB2 ó HDMI
STANDBY ó VIDEO ó S-VIDEO ó COMPONENT(Y, C
• Choose STANDBY, to select the output signal from the RGB OUT
port in the standby mode.
• While QUIT is selected, pressing the ◄ button returns to the
previous menu.
(2) Select one of the RGB ports using ◄/► buttons.
Choosing the RGB1 allows the following choice.
RGB1 ó OFF
Choosing the RGB2 allows the following choice.
RGB2 ó OFF
Choosing other input or STANDBY allows
the following choice.
RGB1 ó RGB2 ó OFF
• OFF disables the RGB OUT port.
Description
SETUP menu
/P , C /P )
B B R R
37