Connecting Power Supply - Hitachi CP-SX635 User Manual – Operating Manual

Setting up

Connecting power supply

1.
Connect the connector of the power cord to the AC IN (AC inlet) of the
projector.
2.
Firmly plug the power cord's plug into the outlet.
WARNING
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to get a new one.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Never modify the power cord.
12
AC IN
►Please use extra caution when connecting the power cord, as
Connector of the power cord
to the outlet