Changing The Batteries - HighGear FM User Manual

CHANGING THE BATTERIES

VIA BASIC & VIA PULSE:
1. Remove battery door using a coin or other small
2. Remove old batteries.
3. Install new batteries, making sure the polarity
4. Replace and tighten the battery door.
5. Replace the battery compartment and fasten
16
IA_FMBFPulse.indd 16
object.
of each is correct.
the screw.
NOTE: The VIA units are powered by CR2032
3v Lithium batteries. These batteries are very
common and can be found at most drug stores
and camera shops.
10/18/05 9:27:33 AM