Using The Pulse Rate Monitor (Via Pulse) - HighGear FM User Manual

USING THE PULSE RATE MONITOR
(VIA PULSE ONLY)
In any pedometer mode:
1. Press the START key to acquire the PULSE-
2. Place your index finger on the Pulse Rate
VIA_FMBFPulse.indd 13
READING MODE.
Sensor located top of the pedometer (Do not
press too hard). The Pulse Monitor will begin to
detect the pulse automatically.
NOTE: It may take few seconds to display the
current pulse rate (BPM= Beat per minute).
13
10/18/05 9:27:26 AM