Datalogic MAGELLAN 1000I Product Reference Manual page 62

Interface Related Features
Keyboard Wedge — cont.
Intercharacter Delay
START / END
One-half of the delay specified below is inserted between scancodes within each character. If the transmission speed is too high, the
system may not be able to receive all characters. You may need to adjust the delay to make the system work properly. Selectable
from 000 to 255 in 10msec increments.
To configure this feature, scan the "START/END" bar code above to place the unit in Programming Mode, then the "Set Intercharac-
ter Delay," followed by the three digits (zero padded) from the Alphanumeric table in
ing your desired length. Exit programming mode by again scanning the "START/END" barcode above/
3-36
This feature does not apply to the USB Keyboard interface.
NOTE
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE:
000 (No Delay)
Appendix C, Alpha-Numeric Pad
Set Intercharacter Delay
Magellan
represent-
®
1000i