Host Echo Quiet Interval - Datalogic MAGELLAN 1000I Product Reference Manual

RS-232 Interface Features — cont.

Host Echo Quiet Interval

This setting specifies the time interval of RS-232 channel inactivity which must transpire before
the scanner will break the host echo loop to transmit the bar code data that has just been
scanned to the host.
START / END
Host Echo Quiet Interval = 10msec
DEFAULT
Host Echo Quiet Interval = 30msec
Host Echo Quiet Interval = 50msec
Host Echo Quiet Interval = 70msec
Product Reference Guide
PROGRAMMING BARCODES
Interface Features
Host Echo Quiet Interval = 0msec
Host Echo Quiet Interval = 20msec
Host Echo Quiet Interval = 40msec
Host Echo Quiet Interval = 60msec
3-15