Specifications - Harman Kardon HK3380 Service Manual

HK3380
Audio Section
Stereo Mode
Continuous Average Power (FTC)
80 Watts per channel, 20Hz–20kHz
@ < 0.07% THD, both channels driven into 8 ohms
100 Watts per channel, 20Hz–20kHz
@ < 0.2% THD, both channels driven into 4 ohms
Input Sensitivity/Impedance
Linear (High Level) 200mV/47k ohms
Signal-to-Noise Ratio (IHF-A) 95dB
Frequency Response
@ 1W (+0dB, –3dB) 10Hz – 110kHz
High Instantaneous
Current Capability (HCC) ±42 amps
Transient Intermodulation
Distortion (TIM) Unmeasurable
Rise Time 16µsec
Slew Rate 40V/µsec
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.
Harman Kardon and Power for the Digital Revolution are
registered trademarks of Harman International Industries, Incorporated.
18 TECHNICAL SPECIFICATIONS
HK 3380 TECHNICAL SPECIFICATIONS
FM Tuner Section
Frequency Range
Usable Sensitivity
Signal-to-Noise Ratio
Distortion
Stereo Separation
Selectivity
Image Rejection
IF Rejection
Tuner Output Level
AM Tuner Section
Frequency Range
Signal-to-Noise Ratio
Usable Sensitivity
Distortion
Selectivity
Video Section
Television System
Signal Format
Input Level
Input Impedance
Sync Polarity
Output Level
Output Impedance
Video Frequency Response 10Hz – 10MHz
General
Power Requirement
Power Consumption
Dimension (Max)
Width
Height
Depth
Weight
4
harman/kardon
87.5 – 108MHz
IHF 1.12µV/13.5dBf
Mono/Stereo 73/72dB
Mono/Stereo 0.3/0.4%
40dB @ 1kHz
±400kHz, 65dB
>80dB
>100dB
1kHz, ±100kHz, Dev 500mV
520 – 1720kHz
>40dB
Loop 500µV/M
1kHz, 50% Mod 0.8%
±10kHz, >25dB
NTSC/PAL/SECAM
Composite
1Vp-p
75 ohms, unbalanced
Negative
1Vp-p
75 ohms, unbalanced
AC 120V/60Hz
3W standby, 200W maximum
(both channels driven)
(Product) (Shipping)
17.4 inches (442mm) 21.5 inches (545mm)
6.6 inches (168mm) 9.9 inches (251mm)
15 inches (382mm) 17.9 inches (455mm)
20.9 lb (9.48kg) 25.1 lb (11.41kg)