Technical Specifications - Harman Kardon HK 3490 Service Manual

harman/kardon

Technical Specifications

Audio Section
Stereo Mode
Continuous Average Power (FTC)
HK 3490: 120 Watts per channel, 20Hz –20kHz
@ < 0.07% THD, both channels driven into 8 ohms
HK 3390: 80 Watts per channel, 20Hz–20kHz@ < 0.07% THD,
both channels driven into 8 ohms
Input Sensitivity/Impedance
Linear (High Level)
Signal-to-Noise Ratio (IHF-A)
Frequency Response
@ 1W (+0dB, –3dB)
High Instantaneous
Current Capability (HCC)
Transient Intermodulation
Distortion (TIM)
Rise Time
Slew Rate
Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.
Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated.
200mV/47kohms
95dB
10Hz –110kHz
HK 3490: ±45Amps
HK 3390: ±42Amps
Unmeasurable
16 µsec
40V/µsec
FM Tuner Section
Frequency Range
Usable Sensitivity
Signal-to-Noise Ratio
Distortion
Stereo Separation
Selectivity
Image Rejection
IF Rejection
AM Tuner Section
Frequency Range
Signal-to-Noise Ratio
Usable Sensitivity
Distortion
Europe:
Video Section
Television System
Signal Format
Input Level
Input Impedance
Sync Polarity
Output Level
Output Impedance
Video Frequency
Response
General
Power Requirement
Power Consumption
Dimension (Max)
Width
Height
Depth
Weight
HK 3490/230 Service Manual
87.5–108MHz
IHF: 1.3µV/13.2dBf
Mono/Stereo: 73/72dBA (DIN)
Mono/Stereo: 0.2/0.3%
40dB @ 1kHz
±400kHz, 65dB
>80dB
>100dB
522–1620kHz
>40dB
Loop: 500µV/M
1kHz, 50% Mod: 0.8%
±9kHz
NTSC/PAL/SECAM
Composite
1Vp-p
75 ohms, unbalanced
Negative
1Vp-p
75 ohms, unbalanced
10Hz – 10MHz
AC 230V/50Hz
HK 3490: 3W standby, 310W maximum
(both channels driven)
HK 3390: 3W standby, 230W maximum
(both channels driven)
440mm
165mm
382mm
HK 3490: 10.4kg
HK 3390: 9.5kg
Page 4 of 70