Table of Contents
Advertisement
•
Effect. Apply a special effect to your photos or videos.
•
Metering Mode. Choose how the camera measures the amount of
light in images to calculate exposure values. When Touch Focus
is enabled, the Spot metering mode is set automatically and
the camera measures light around the focus point. When Touch
Focus is disabled, you can select Center Area to measure light in
the center of the image or Average to measure light in the whole
image.
•
Prefix. The file name of a newly captured photo or video is set to
"IMAG" or "VIDEO" followed by a sequential number, for example:
IMAG0001.jpg. You can also choose the current Date or Date &
Time as the file name prefix.
You cannot change the file name prefix when saving captured
photos to a storage card. Captured photos are named using the
convention IMAGnnnn.jpg (where 'nnnn' is the counter), and are
saved to the \DCIM\100MEDIA folder on the storage card.
•
Counter. Reset the file numbering back to 1.
•
Flicker Adjustment. When taking indoor shots under fluorescent
lighting, keep this setting on Auto or change it to the proper
frequency (0Hz or 0Hz) of the power in your country to reduce
flicker.
•
Grid (Photo mode). Show a grid on the screen so you can easily
frame and center your subjects.
•
Record with Audio (Video and MMS Video modes). Select On to
record videos with audio, or Off to record videos without audio.
•
Recording Limit (Video mode). Set the maximum duration or file
size for recording video.
•
Show Reminder (Contacts Picture mode). Select On if you want
the Camera to prompt you to assign the captured picture to a
contact.
Chapter 1 Camera and Multimedia 9
Advertisement
Table of Contents
Troubleshooting
