Contents 1 Important Safety Notice 2 Your Bluetooth speaker Introduction What's in the box Overview of the speaker 3 Get started Charge the built-in battery Turn on/off 4 Use Bluetooth devices Connect a Bluetooth device Connect two Bluetooth devices simultaneously Play from Bluetooth device Disconnect a device Reconnect a device...
Gibson Innovations may of with normal household waste. We void the user’s authority to operate the strongly advise you to take your product equipment. to an official collection point or a Philips service centre to have a professional remove the rechargeable battery.
Page 5
Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
What's in the box Bluetooth Check and identify the contents of your speaker package: Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. Introduction This speaker has passed splash-proof test (IPX4) and can be used near water.
Overview of the speaker • Enter Bluetooth pairing mode. • After Bluetooth connection, respond to an incoming call. • Clear Bluetooth pairing information. b LED indicator • Indicate battery or Bluetooth connection status. c Volume knob ( • Turn the speaker on or off. •...
3 Get started System Battery status LED status status Low power Flashing Always follow the instructions in this red for 10 chapter in sequence. minutes, then turn blue. Charge the built-in Under Solid red for 5 charging seconds, then battery turn blue Under Solid red...
Page 9
Switch to standby mode The speaker switches to standby mode automatically when being idle for 15 minutes. Note • To wake up the speaker from standby mode, press on the top of the speaker.
Bluetooth device. devices that can be paired (see the user manual of the device). LED indicator Description Select [Philips BT7700] displayed Flashing blue Ready for pairing on your device for pairing. If quickly necessary, input “0000” as the...
Reconnect a device • When you turn on the speaker, it tries to reconnect the last connected device automatically; • If not successful, select [Philips BT7700] on your Bluetooth menu to start reconnection. Clear pairing information • Press and hold...
5 Other Connect an audio input cable (not supplied) with a 3.5 mm connector features on both ends to • the AUDIO IN socket on this speaker, and • the headphone socket on the external device. Play audio on the external device Listen to an external (refer to its user manual).
6 Specif ications Dimensions - Main Unit (W x H x D) 81 x 214 x 76 mm Weight Note - Main Unit 0.7 kg • Product information is subject to change without prior notice. Rated output 2 x 7.5W RMS ≤1% THD power (Amplifier)
If you encounter problems when using this device, check the following points The audio quality is poor after before requesting service. If the problem connection with a Bluetooth-enabled remains unsolved, go to the Philips Web device. page (www.philips.com/support). When • The Bluetooth reception is poor.
Page 16
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the BT7700B/00 and is the answer not in the manual?
Questions and answers