Contents 1 Important Important safety instructions 2 Your portable speaker Introduction What's in the box Overview of the speaker 3 Get started Charge the built-in battery Turn on/off 4 Play from Bluetooth devices Connect a device Disconnect a device Reconnect a device 5 Play from external devices 6 Product information Amplifier...
1 Important l Apparatus shall not be exposed to dripping or splashing. m Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). Warning • Never remove the casing of this speaker. • Note Never lubricate any part of this speaker.
2 Your portable Overview of the speaker speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction a b c With this speaker, you can enjoy audio from Bluetooth-enabled devices or other external a LED indicator devices.
3 Get started The LED indicator indicates the battery status. Under charging Fully charged "OFF" mode Flashing white Always follow the instructions in this chapter in "AUDIO IN" Flashing white Solid white sequence. mode "Bluetooth" Flashing blue Flashing blue mode or solid blue or solid blue Charge the built-in battery...
4 Play from Select [Philips BT50] displayed on your device for pairing and connection. If Bluetooth necessary, input “0000” as the pairing password. devices » After successful pairing and connection, the speaker beeps twice, and the LED indicator turns solid blue.
Reconnect a device When you turn on the speaker, it will reconnect the last connected device automatically; If not, select [Philips BT50] on your Bluetooth device to start connection.
5 Play from external devices With this speaker, you can also listen to an external audio device such as an MP3 player. Note • Make sure that music playback through Bluetooth is stopped. Connect an audio input cable (not supplied) with a 3.5 mm connector on both ends to the AUDIO IN socket on this speaker, •...
6 Product General information information Power Supply (through 5 V, 0.5 A micro USB socket) Built-in Li-polymer 3.7 V, 365 mAh Note Battery Dimensions - Main Unit • Product information is subject to change without prior (W x H x D) 61 x 76 x 61 mm notice.
• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them. Fail to find [Philips BT50] on your device for pairing. • Press and hold PAIRING for more than three seconds, and then try again.
However, there is no guarantee that philips.com. interference will not occur in a particular This product contains non-removable batteries: installation. If this equipment does cause harmful •...
Always bring your product to a professional to remove the built-in battery. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by...