Contents 1 Important 2 Your portable speaker Introduction What's in the box Overview of the speaker 3 Get started Attach the string Charge the built-in battery Turn on/off 4 Play from Bluetooth devices Connect a device Disconnect a device Reconnect a device Connect another device 5 Play from external devices 6 Product information...
1 Important Warning • Never remove the casing of this product. • Never place this product on other electrical equipment. • Keep this product away from direct sunlight, naked flames or heat. • Read these instructions. • Heed all warnings. •...
2 Your portable speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction This speaker has passed splash-proof test (IPX4) and can be used near water.
Overview of the speaker • Enter Bluetooth pairing mode. • After Bluetooth connection, respond to a call. • Clear Bluetooth pairing information. • Turn the speaker on or off. c LED indicator • Indicate battery or Bluetooth connection status. d AUDIO IN •...
3 Get started Connect the USB cable between • the DC IN socket on the speaker, • a USB socket on a computer. Always follow the instructions in this chapter in sequence. Attach the string For easy carrying, attach the supplied string to this speaker as illustrated.
The fifth paired device the user manual of the device). will replace the first one. • Select [Philips BT110] displayed Any obstacle between this speaker and a Bluetooth device can reduce the on your device for pairing and operational range.
When you turn on the speaker, it will reconnect the last connected device automatically; • If not, select [Philips BT110] on your Bluetooth menu to start • You can use your Bluetooth device to reconnection. control play.
Play from external devices With this speaker, you can also listen to an external audio device such as an MP3 player. Note • Make sure that music playback through Bluetooth is stopped. Connect an audio input cable (not supplied) with a 3.5 mm connector on both ends to •...
6 Product General information information DC Power (Supply 5 V, 1 A Input) Built-in Battery 3.7 V, 800 mAh Note Dimensions - Main 98 x 77 x 35 Unit (W x H x D) • Product information is subject to change Weight - Main Unit 0.15 kg without prior notice.
Never remove the casing of this device. product or remove any obstacle between them. To keep the warranty valid, never try to Fail to find [Philips BT110] on your repair the system yourself. device for pairing. If you encounter problems when using •...
We equipment. strongly advise you to take your product to an official collection point or a Philips service centre to have a professional Compliance remove the rechargeable battery.
foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Trademark notice The Bluetooth®...
Page 16
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the PixelPop BT110R/00 and is the answer not in the manual?
Questions and answers