Subscribe to Our Youtube Channel
Related Manuals for Worx WX550.2
Summary of Contents for Worx WX550.2
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 20V Li-Ion WX550 WX550.X multi-purpose saw...
-
Page 2: Electrical Safety
PRODUCT SAFETY tools may result in serious personal injury. b) Use personal protective equipment. Always GENERAL POWER TOOL wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard SAFETY WARNINGS hat, or hearing protection used for appropriate conditions will reduce personal injuries. -
Page 3: Reciprocating Saw Safety Warnings
RECIPROCATING SAW k) Recharge only with the charger specified SAFETY WARNINGS by Worx. Do not use any charger other than that specifically provided for use 20V Li-Ion WX550 WX550.X multi-purpose saw... - Page 4 with the equipment. l) Do not use any battery pack which is not Do not burn designed for use with the equipment. m) Keep battery pack out of the reach of children. n) Retain the original product literature for Batteries may enter water cycle if future reference.
- Page 5 Lock Unlock Pinch points RCM marking ABN: Australian Business Number. By this number, business information such as entity type, status, business location etc. can be found at website http://abr.business. gov.au. ABN of Positec Australia Pty Limited is 14 101 682 357 20V Li-Ion WX550 WX550.X multi-purpose saw...
- Page 7 Position II Position I...
- Page 8 3000/min...
-
Page 10: Component List
COMPONENT LIST these models. *** Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage ON/OFF SWITCH is 18 volts. LOCK-OFF BUTTON SUGGESTED BATTERIES AND HAND GRIP AREAS CHARGERS PIVOT RELEASE BUTTON MOTOR COVER Category Type Capacity PENDULUM FUNCTION CONTROL WA3550... -
Page 11: Intended Use
BEFORE OPERATION The declared vibration total value and the declared noise Removing the battery pack See Fig. A1 emission value have been measured in accordance with a standard test method and may be used for comparing one Charging the battery pack See Fig. -
Page 12: Maintenance
Cutting Possible Possible Symptom WARNING! Causes Solution • Never hold the pivot head when The tool Over load Relieve the load operating the tool. suddenly Battery on the machine • Never hold the motor cover when stops during temperature too immediately and operating the tool. -
Page 13: Declaration Of Conformity
CONFORMITY Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany On behalf of Positec declare that the product, Description Worx Li-ion Multi-Purpose Saw Type WX550 WX550.X (5-designation of machinery, representative of Saw) Function Sawing various materials Complies with the following Directives,... - Page 14 CONFORMITY Positec (UK & Ireland) Ltd. PO Box 6242, Newbury, RG14 9LT, UK On behalf of Positec declare that the product, Description Worx Li-ion Multi-Purpose Saw Type WX550 WX550.X (5-designation of machinery, representative of Saw) Function Sawing various materials Complies with the following regulations:...
- Page 16 After-sales Service and Application At www.worx.com you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: 0345 202 9679 E-Mail: customerservices@worxtools.com www.worx.com Copyright © 2021, Positec. All Rights Reserved. AR01414203...
Need help?
Do you have a question about the WX550.2 and is the answer not in the manual?
Questions and answers