HDMI Output: Enables you to select the Environment and Equalizer settings. You
can select an environment, such as Stone Room or Auditorium. Under Equalizer,
you can either click a preset button, such as Pop or Live, or manually adjust the
settings and then save them for easy selection later.
Configuring sound for recording with the
Realtek HD Audio Manager
The microphone connector is ready to use for recording sound. If you want to use another
connector for recording, such as the Digital Audio In connector, complete the following
steps to select it:
Click the Windows Start Button
Click Control Panel.
Click Hardware and Sound, and then Realtek HD Audio Manager.
Click the Line In tab.
Click Digital In tab, and then select Set Default Device.
Click OK to close the window.
NOTE: You can retask the front pink, blue, and green connectors to perform other audio
functions; see "Retasking front panel audio connectors."
on the taskbar.
Configuring Speaker and Sound Options