Download Print this page

HP Compaq Presario,Presario SR5710F Getting Started: Configuring Speaker And Sound Options

Hp compaq presario,presario sr5710f: user guide.
Hide thumbs

Advertisement

Configuring Speaker and Sound Options

Speakers are included with the monitor (select models only), or they are sold separately.
For details about connecting stereo speakers to the computer, see the setup poster. For
details about connecting multichannel speakers, see "Connecting Speakers or
Microphone."
NOTE: Speakers may be passive (no power button or power cord) or active (power button
or power cord). Your computer supports only active (powered) speaker systems; the
speaker system must have its own power cord.
A stereo speaker set is a left-right, two-channel speaker system. A multichannel audio
speaker system is a system with more than two channels, and it may include a subwoofer.
For example, a 5.1 channel speaker system, referred to as six-speaker mode, uses two
front speakers (left-right), two rear speakers (left-right), a center speaker, and a subwoofer.
If your computer has multichannel audio speaker capacity (select models only), you can
connect four channels for four-speaker output, or six channels for 5.1 speaker output.
Your model may include one of three analog sound connector types on the back of
the computer:
Three connectors (Realtek Audio)
Six connectors (Realtek Audio)
Audio sound card (Creative Sound Blaster X-Fi and X-Fi Fatality, or Analog Devices,
Inc (ADI))
Your system may also have a separate Digital Out connector (select models only).
See "Connecting Speakers or Microphone" for more information about connecting your
speaker system, and then configure the audio software for sound output as described in
this section.
Configuring Speaker and Sound Options
73

Advertisement

Troubleshooting

   Related Manuals for HP Compaq Presario,Presario SR5710F

This manual also for:

Pavilion a6403 Pavilion a6410t Pavilion a6430 Pavilion a6500 Pavilion a6530 Pavilion a6544... Show all

Comments to this Manuals

Symbols: 0
Latest comments: