PAC SR-GM14HX Manual

PAC SR-GM14HX Manual

Stinger horizon10 radio replacement kit for select silverado/sierra trucks

Advertisement

SR-GM14HX
Introduction and Features
The SR-GM14HX is a complete radio replacement kit for the installation of the Stinger HORIZON10
Silverado and GMC Sierra trucks. All modules, cables and adapters are included to retain important features of the factory system,
including: OnStar, front and rear park assist, warning chimes, factory reverse camera, steering wheel-mounted radio controls and
AM/FM reception. Plug & Play wiring harnesses allow for quick and easy installation without the need to cut or splice any wiring.
The display mounting panel allows flush mounting the 10 inch display without modifying/cutting any part of the vehicle's sub-dash.
Important Notes
We recommend reading this manual thoroughly to familiarize yourself
with the entire process prior to beginning the installation.
1. Does not retain the following factory features:
● Factory satellite radio
● Rear seat entertainment system (RSE)
● Steering wheel control backlighting
● Factory USB Ports
2. Not compatible with vehicles equipped with Bose amplified audio system.
3. Please make your vehicle settings selections before removing the factory radio for optimal installation time. Once the
radio has been removed, the vehicle settings which are normally selected through the factory radio can be accessed and
changed by downloading and installing the PAC Vehicle Settings program from http://www.pac-audio.com/firmware
4. The Voice button can be set to activate the factory OnStar function when pressed for longer than 1.5 seconds or given the
ability to control the aftermarket radio. This option can be found in the PAC Vehicle Settings program mentioned above in note
three. The default setting for this button is to control the factory OnStar. If this button is set to control the aftermarket radio,
OnStar can still be accessed by using the mirror controls.
5. For the HORIZON10 Display to be waterproof, you must install 6 waterproof plugs to the back of the touch panel display in the
screw holes not used for mounting.
Recommended Tools
Plastic Panel Tool
7mm Socket
10mm Socket
Included Components
1. HORIZON10 Display Mounting Panel
2. Dual USB Extension (SSUSB3)
3. AM / FM Antenna Adapter (BAA22)
4. Main Harness Adapter (SR-SRK-ADAPT-IX2XX)
5. Main Harness (SR-GM14H-HAR-A)
6. Vehicle Side Harness C (SR-GM14H-HAR-C)
7. Vehicle Side Harness B (SR-GM14H-HAR-B)
8. Radio Replacement Interface (RP5-GM51)
9. Steering Wheel Control Harness (GM5LIN-SW-HAR)
10. Factory Rear Camera Adapter (CAM-GM51-HAR)
11. IOB Display Harness (GM5CAM-DIS-HAR)
12. Chime Module (CMX)
13. Differential Video Adapter (RPA-VA1)
14. Satellite Antenna Adapter (SAT-01)
15. Side Mounting Brackets (L & R)
NOTE: Along with the SR-GM14HX components, additional
hardware and wire harnesses from the HORIZON10 (ix210)
kit will also be used in the installation.
®
Pacific Accessory Corporation
Ratchet
Torx T15 Screwdriver
Small Flat-blade Screwdriver
© 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions.
Stinger HORIZON10
Radio Replacement Kit for select
2014-2019 Silverado/Sierra Trucks
Pick Tool
Wire Feeder
Power Screwdriver
1
2
9
8
13
12
modular radio in Chevrolet
®
7
6
5
4
3
11
10
15
14
Rev: V1
Page 1
Date: 090424
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR-GM14HX and is the answer not in the manual?

Questions and answers

Summary of Contents for PAC SR-GM14HX

  • Page 1 4. The Voice button can be set to activate the factory OnStar function when pressed for longer than 1.5 seconds or given the ability to control the aftermarket radio. This option can be found in the PAC Vehicle Settings program mentioned above in note three.
  • Page 2: Wiring Overview

    Stinger and radio. If adding HORIZON10 additional components, Connections additional connections will be needed. ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 2 Date: 090424 Pacific Accessory Corporation...
  • Page 3: Section 1: Disassembly

    Remove all connectors from the (This plug will not be reconnected). equipped. back of the panel. ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 3 Date: 090424 Pacific Accessory Corporation...
  • Page 4 ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 4 Date: 090424 Pacific Accessory Corporation...
  • Page 5 Unplug the factory USB harness from the HMI module. multiple colored plugs facing down. port from the backside. ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 5 Date: 090424 Pacific Accessory Corporation...
  • Page 6 ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 6 Date: 090424 Pacific Accessory Corporation...
  • Page 7: Section 2: In-Vehicle Harness Connections And Preparation

    Secure with the rear of the CD/DVD opening. flanged nut and then lock with the lock nut. ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 7 Date: 090424 Pacific Accessory Corporation...
  • Page 8 HAR male end into the female to the radio opening, securing with connector on the steering column. zip ties. ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 8 Date: 090424 Pacific Accessory Corporation...
  • Page 9 ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 9 Date: 090424 Pacific Accessory Corporation...
  • Page 10: Section 3: Interface And Main Harness Connections And Preparation

    Connect the male and female ends to the Main Harness. Harness. of the Light Green leads together. ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 10 Date: 090424 Pacific Accessory Corporation...
  • Page 11: Section 4: Display Mounting Panel Preparation

    ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 11 Date: 090424 Pacific Accessory Corporation...
  • Page 12: Section 5: Radio Module Preparation

    Brackets and four M5x10 screws. above. above. ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 12 Date: 090424 Pacific Accessory Corporation...
  • Page 13: Section 6: Radio Unit Installation

    INPUT” (2) and connect the wire from the GM5LIN-SW-HAR to the “SWC INPUT” (3). ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 13 Date: 090424 Pacific Accessory Corporation...
  • Page 14 These are the connections for a typical installation. If adding additional cameras, amplifiers or satellite radio, those connections should be made at this point. ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 14 Date: 090424 Pacific Accessory Corporation...
  • Page 15 * The Chime Module has a 4 position volume selector on the side. Setting 1 being the loudest and 4 being the quietest. ® Rev: V1 © 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions. Page 15 Date: 090424 Pacific Accessory Corporation...
  • Page 16: Technical Support

    Product Updates (Firmware) Firmware Updates (RadioPRO) The PAC RP5-GM51 interface can be updated with new firmware as it becomes available using the PAC-UP interface updater (sold separately). Please visit www.PAC-audio.com/firmware for available updates. Firmware Updates (Stinger Radio and PAC Application APK) To update the HORIZON10 radio firmware and PAC Application APK firmware, refer to the HORIZON10 product page: https://stingersolutions.com/products/stinger-horizon10-10in-radio...

Table of Contents