Page 3
If you have any questions, call your nearest contact center or find help and information online at www.samsung.com . Important safety symbols and precautions: Hazards or unsafe practices that may result in severe WARNING personal injury or death.
Page 4
Safety precautions Do not install this appliance near a heater, inflammable material. Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak. ...
Page 5
FOR POWER SUPPLY WARNING Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis. Unplug the power plug and clean it with a dry cloth. ...
Page 6
Safety precautions In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord. Do not use a ventilating fan. A spark may result in an explosion or fire. To reinstall the air conditioner, please contact your nearest service center.
Page 7
Do not insert your fingers or foreign substances into the air inlet/outlet of the air conditioner. Take special care that children do not injure themselves by inserting their fingers into the product. Do not strike or pull the air conditioner with excessive force. ...
Page 8
Safety precautions Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance. This may result in electric shock, fire, problems with the product, or injury. Do not operate the appliance with wet hands.
WARNING FOR CLEANING Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the appliance. This may result in discoloration, deformation, damage, electric shock or fire. Before cleaning or performing maintenance, unplug the air conditioner from the wall socket and wait until the fan stops.
Page 10
The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use.
Page 15
Press the button to set the operating mode. • Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry , Fan and Heat. Press the button to set the desired fan speed. Auto (Auto) Cool (Auto),...
Page 18
• After setting the timer,the set time will be displayed for 3 second before it ears.
Page 21
• Make sure the power is turned off and unplugged from the wall socket when cleaning the air conditioner. CAUTION • D o not clean the display using alkaline detergent. • D o not use sulfuric acid, hydrochloric acid, organic solvents CAUTION (such as thinner, kerosene and acetone etc.) to clean the surface of the product or put any stickers on it. They may damage the surface of the air conditioner. • B e careful with the sharp edges on the outdoor unit heat exchanger.
Page 23
1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and disconnect the power plug. There may be internal damage if moisture is left in components. 2. Before using the air conditioner again, dry the inner components of the air conditioner again by running in Fan mode for 3 to 4 hours.
Need help?
Do you have a question about the AR12FC2UAEB and is the answer not in the manual?
Questions and answers