Summary of Contents for Burg Wächter secuENTRY active 7700
Page 1
Dear Customer, Thank you very much for deciding on the secuENTRY active 7700 motorised lock. secuENTRY active The secuENTRY active 7700 enables the motorised opening of Setup with app the door - without having to replace existing components and BURGsmart without the need to install electrical cables (plug &...
For the operation of the secuENTRY active 7700, a key remains permanently inserted on the inner side. The emergency and danger function ensures that the door can still be opened from the Continuous use of the rotary knob or key from the outside can impair the lifetime of the profile outside with a key if a technical failure occurs (e.g.
Page 3
From the fourth incorrect entry, via the BURG-WÄCHTER BURGsmart app (Fig. 1). the motorised lock is blocked for three minutes each time. The secuENTRY active 7700 is delivered from the factory with a random administrator code (II) (Fig. 1), consequently a code change is not mandatory.
Page 4
(Fig. 2). There are two individual parts: the motor unit and the back cover (Fig. 3) Fig. 1 Fig. 2 0 - 4 mm 4 - 35 mm No fitting Go to chapter Go to chapter Fig. 3 4 I English secuENTRY active 7700...
Page 5
Go to the "Motor unit assembly" if necessary. chapter. Proceed with point Go to the "Motor unit assembly" these instructions. chapter. Proceed with point these instructions. Fig. 5 5 I English secuENTRY active 7700...
Page 6
Do not Go to the "Motor unit assembly" proceed with the following steps chapter. Proceed with point until the times shown in the table these instructions. (Tab. 1) have elapsed. 6 I English secuENTRY active 7700...
Page 7
Attention: The cylinder roller must be centred/ aligned in the opening as shown in Fig. 4, particularly in the case of flush- fitting cylinders. Proceed with point these instructions. Fig. 4 7 I English secuENTRY active 7700...
Page 8
7700 activation I - User Note: Assembly must be completed Tap on the menu item "I - User" (Fig. 1). before the secuENTRY active 7700 BURGsmart A list of the users that have already can be fully setup. Information on the work steps can be found in the been created is displayed.
Page 9
Access data | Enter RFID tag Note: If you wish to enter opening media for other users, go back one The secuENTRY active 7700 is not menu and select the respective user intended for use with RFID tags. You can (Fig.
Page 10
If you do not have a keypad, you can skip this menu item and proceed directly to the next chapter. Tip on "Skip" (Fig. 8). Fig. 7 Fig. 8 Fig. 4 Fig. 9 QR code sticker motorised lock 10 I English secuENTRY active 7700...
Page 11
Next, the secuENTRY active 7700 will be The app requires confirmation of calibrated. This step is only possible if whether the calibration was successful. the motorised lock is already mounted It asks whether the door has been on the door. The app therefore asks unlocked.
Page 12
Fig. 8 have not yet been transmitted to the QR code sticker lock. In order to do so, tap the red motorised lock button "program" on the respective lock Fig. 3 Fig. 4 (Fig. 4). 12 I English secuENTRY active 7700...
Page 13
Open and close the secuENTRY lock Linking the secuENTRY lock in the main screen of the BURGsmart app If you have set up the motorised lock secuENTRY active 7700 according to these instructions, The BURGsmart app offers you the you have the option to open the lock with the BURGsmart app.
Page 14
See chapter "secuENTRY active 7700 locking Note: Please note that the child safety modes" for more details. lock can only be activated when the Attention: The rotary knob is designed door is locked.
Page 15
The following settings can now be secuENTRY active 7700 locking modes made here: The motorised lock offers you various Closing delay setting options that you can adjust Boost function according to your preferences. Single locking Proceed as follows to access...
Page 16
Using the BURGsmart app, you can set whether the motorised lock should lock once or twice (Fig. 8). Note: Please note that this function can only be used for doors that can be Fig. 12 locked twice. Fig. 8 16 I English secuENTRY active 7700...
Page 17
Battery status display and replacing the batteries to the correct polarity according to the drawing in the battery compartment Each time the secuENTRY active 7700 is (Fig. 6). activated via the BURGsmart app, the battery status will be displayed on the Insert the motor unit into the back screen (Fig.
QR code(s) be presented to your dealer together with the original documentation. Your motorised lock secuENTRY active 7700 can be supplemented with the following components: When returning goods due to your right of withdrawal, all parts of the appliance must also be in their factory settings.
Page 19
secuENTRY active 7700 BURG-WÄCHTER KG Altenhofer Weg 15 58300 Wetter Germany info@burg.biz www.burg.biz...
Need help?
Do you have a question about the secuENTRY active 7700 and is the answer not in the manual?
Questions and answers