Compaq Evo N410c Hardware Manual
  1. Manuals
  2. Brands
  3. Compaq Manuals
  4. Laptop
  5. EVO NOTEBOOK N410C
  6. Hardware manual

Compaq Evo N410c Hardware Manual

Hp evo n410c: hardware guide
Hide thumbs Also See for Evo N410c:
Table of Contents

Advertisement

Quick Links

See also: Maintenance and Service Manual , User Manual
b
Hardware Guide
Compaq Evo Notebook N410c Series
Document Part Number: 274039-001
July 2002
This guide provides comprehensive information on setting up the
notebook's hardware and software, identifying notebook
components, using the battery pack, connecting external devices,
and adding upgrades and accessories.

Advertisement

Table of Contents
loading

Related Manuals for Compaq Evo N410c

Summary of Contents for Compaq Evo N410c

  • Page 1 Hardware Guide Compaq Evo Notebook N410c Series Document Part Number: 274039-001 July 2002 This guide provides comprehensive information on setting up the notebook’s hardware and software, identifying notebook components, using the battery pack, connecting external devices, and adding upgrades and accessories.
  • Page 2 © 2002 Compaq Information Technologies Group, L.P. Compaq, the Compaq logo, and Evo are trademarks of Compaq Information Technologies Group, L.P. in the U.S. and/or other countries. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and/or other countries.

  • Page 3: Table Of Contents

    Contents 1 Hardware and Software Setup Setting Up the Hardware ......1–1 Setting Up the Software ......1–6 After Software Setup .
  • Page 4 Contents Using the Easy Access Buttons ....3–9 Using Default Settings......3–9 4 Battery Packs Charging Battery Packs .
  • Page 5 Contents Connecting a Modem ......7–6 Using the RJ-11 Cable......7–6 Using a Country-Specific Modem Cable Adapter.

  • Page 6: Hardware And Software Setup

    Hardware and Software Setup Setting Up the Hardware 1. Record the operating system Product Key printed on the Certificate of Authenticity label on the bottom of the notebook. The Product Key is essential when you: ❏ Set up the software. ❏...
  • Page 7 Hardware and Software Setup Å WARNING: This is a Class B digital device, pursuant to Part 15 of the FCC Rules. For more Class B information, refer to the Regulatory and Safety Notices Guide on the Documentation Library CD, included with the notebook.
  • Page 8 Hardware and Software Setup 3. Connect the notebook to an external outlet. Plug the AC adapter cable into the power connector 1 . Plug the power cord into the AC adapter 2 and into an electrical outlet 3 . ✎ Power cords and electrical outlets vary by country.
  • Page 9 Hardware and Software Setup 4. Open the notebook by sliding the display latch to the right 1 and raising the display 2 . 1–4 Hardware Guide...
  • Page 10 Hardware and Software Setup 5. Turn on the notebook by sliding and momentarily holding, then releasing, the power switch 1 . When power is turned on: ❏ The power/standby light 2 turns on. ❏ The battery pack in the primary battery bay and the external battery pack (if attached) begin to charge and the battery light 3 turns on.

  • Page 11: Setting Up The Software

    Hardware and Software Setup Setting Up the Software Read the following guidelines, then set up the software. Ä CAUTION: To prevent file corruption and ensure that the correct drivers install during initial setup: ■ Do not unplug the notebook from the electrical outlet. ■...

  • Page 12: After Software Setup

    Hardware and Software Setup After Software Setup After the initial setup is complete, you may want to Install any optional applications. You can install third-party applications or preloaded Compaq utilities at any time after initial setup is complete. ■ To install a third-party application, refer to the documentation included with the application.
  • Page 13 Hardware and Software Setup To access Compaq Help and Support, select Start > Compaq Info Center > Compaq Help and Support. For information about choosing a workspace and creating a safe and comfortable work environment, refer to the Safety & Comfort Guide on the Documentation Library CD included with the notebook.

  • Page 14: Look At The Notebook

    A Look at the Notebook Front Panel Components Front Panel Components Component Function Vents Allow airflow to cool internal components. Display release latch Releases the display to open the notebook. Volume buttons (2) Adjust or mute the system volume. MultiPort Supports an optional USB-enabled wireless device such as a Bluetooth MultiPort, 802.11b Wireless LAN...

  • Page 15: Top Components

    A Look at the Notebook Top Components Top Components Light, Button, or Component Function ■ Standby button Turns on the notebook if it is off. ■ Initiates and exits Standby. ■ When pressed with the key, initiates Hibernation. Easy Access buttons (4) Four buttons that provide quick access to the Internet.
  • Page 16 A Look at the Notebook Top Components (Continued) Light, Button, or Component Function Microphone Inputs single-channel sound to the notebook; can be used whether the notebook is open or closed. Display switch Can be set to turn off the notebook display if the notebook is closed while on.
  • Page 17 A Look at the Notebook Top Components (Continued) Light, Button, or Component Function Right TouchPad button Functions like the right mouse button on an external mouse. TouchPad Moves the mouse cursor, selects, and activates. Left TouchPad button Functions like the left mouse button on an external mouse.

  • Page 18: Right Side Components

    A Look at the Notebook Right Side Components Right Side Components Component Function Power switch Initiates and resumes from Hibernation. Stereo Connects stereo speakers, speaker/headphone jack headphones, headset, or television audio. Microphone jack Connects a single-sound channel microphone. PC Card eject button Ejects a PC Card from the PC Card slot.
  • Page 19 A Look at the Notebook Right Side Components (Continued) Component Function Universal serial bus (USB) Connects USB 2.0 and 1.1 compliant connector devices to the notebook using a standard USB cable. External MultiBay connector Connects an optional External MultiBay to the notebook using the External MultiBay-Powered USB Cable.

  • Page 20: Left Side Components

    A Look at the Notebook Left Side Components Left Side Components Component Function External monitor connector Connects an external monitor or overhead projector. AC power connector Connects any one of the following: ■ AC Adapter ■ Optional Automobile Power Adapter/Charger ■...

  • Page 21: Bottom Components

    A Look at the Notebook Bottom Components Bottom Components Component Function External battery release Release the optional external latches (2) battery pack. Expansion connector Connects the notebook to an optional Mobile Expansion Unit. Serial number Identifies the notebook; needed when you call Compaq customer support.
  • Page 22 A Look at the Notebook Bottom Components (Continued) Component Function ✎ ROM Access Door Do not open or remove. This door is for factory use only. Provides airflow to cool internal components. Memory expansion Covers the memory expansion compartment cover compartment that contains one memory expansion slot for a memory expansion board.

  • Page 23: Rear Panel Components

    A Look at the Notebook Rear Panel Components Rear Components Component Function Parallel connector Connects a parallel device. Serial connector Connects a serial device. ✎ The notebook serial port is disabled when the notebook is connected to an optional Mobile Expansion Unit.

  • Page 24: Additional Standard Components

    A Look at the Notebook Additional Standard Components The components included with the notebook vary by geographic region and the notebook hardware configuration ordered. ✎ Some components, such as the hard drive and the primary battery pack, ship inside notebook bays identified in previous sections and are not included in this illustration.
  • Page 25 A Look at the Notebook Additional Standard Components Component Function Power cord Connects the AC adapter to an AC electrical outlet. AC Adapter Converts AC power to DC power. 3-to-2-prong plug adapter Adapts the U.S. power cord to a (Japan only) two-prong electrical outlet in Japan.
  • Page 26 A Look at the Notebook Additional Standard Components (Continued) Component Function Adapts the modem cable to a Country-specific modem adapter (included with internal non-RJ-11 telephone jack. modem models by region as (Adapters vary by region.) required) Network cable (network Connects the notebook to an †...

  • Page 27: Pointing Devices And Keyboard

    Pointing Devices and Keyboard Using the TouchPad The TouchPad performs the same basic operations as a mouse. It functions with any software that supports a Microsoft-compatible includes left 2 and right 3 TouchPad mouse. The TouchPad buttons for function or application selection. To operate the TouchPad, slide your finger across its surface in the direction you want to move the cursor, and click the left or right button to make a selection or complete an activity.

  • Page 28: Using Hotkeys And Shortcut Keys

    Pointing Devices and Keyboard Using Hotkeys and Shortcut Keys Hotkey and Shortcut Key Quick Reference Function Hotkey Return to Original State Turn on or off the Fn+F2 Fn+F2 wireless device connected to the MultiPort Fn+F4 Fn+F4 Switch display and image Adjust system volume Fn+F5 Fn+F5...

  • Page 29: Hotkeys

    Pointing Devices and Keyboard To enable the sequential feature, press the key 5 times. A beep following the fifth pressing confirms that the feature is enabled. The feature remains enabled until you disable it. To disable this feature, press the key 5 times.

  • Page 30: Shortcut Keys

    Pointing Devices and Keyboard To use hotkeys on an external keyboard, which does not have an key, press the scroll lock key twice, then the other key only of the hotkey combination. For example, to use the hotkeys, Fn+F10 press scroll lock+scroll lock+F10.
  • Page 31 Pointing Devices and Keyboard Adjust System Volume (Fn+F5) Press to display the system volume level slide bar. Click Fn+F5 and drag the slide bar upward to increase volume or downward to decrease volume. You also can adjust the volume with the left and right arrow keys.
  • Page 32 Pointing Devices and Keyboard Adjust Screen Brightness (Fn+F10) Press to display the screen brightness control slide bar. Fn+F10 Click and drag upward on the slide bar to increase screen brightness or downward to decrease screen brightness. You also can adjust the brightness with the left and right arrow keys. Display System Information (Fn+esc) Press to display information about system hardware...

  • Page 33: Using The Embedded Numeric Keypad

    Pointing Devices and Keyboard Using the Embedded Numeric Keypad The embedded numeric keypad consists of a cluster of 16 keys 1 . The character in the upper right corner of each key identifies the keypad function of that key. The standard keyboard functions of the keys in the keypad are disabled when the keypad is enabled.

  • Page 34: Converting The Numeric Keypad Keys To

    Pointing Devices and Keyboard Converting the Numeric Keypad Keys to Standard Keys To use the keypad keys temporarily as standard keys while the keypad is enabled: ■ Press and hold to type in lowercase. ■ Press and hold to type in uppercase. Fn+shift When the key is released, the keypad function returns.

  • Page 35: Using The Easy Access Buttons

    Pointing Devices and Keyboard Using the Easy Access Buttons The 4 Easy Access buttons provide you with one-keystroke access to any Internet or network destination, software application, or data file in your system. Using Default Settings Until your Internet or network services are set up, all buttons launch the Internet setup wizard for your operating system.
  • Page 36 Pointing Devices and Keyboard Each button can be assigned to an Internet or network destination of your choice or to any software application or data file in your system. Button assignments can be grouped into schemes. When you select a scheme, only the button assignments within that scheme are active.

  • Page 37: Battery Packs

    Battery Packs Charging Battery Packs The notebook supports up to two battery packs: ■ Primary battery pack in the battery bay ■ Optional external battery pack that can be attached to the notebook When the notebook is docked in an optional Mobile Expansion Unit (MEU), the system supports up to four battery packs: ■...
  • Page 38 Battery Packs Multiple battery packs in the system charge and discharge in a preset sequence determined by location. ■ Charge sequence: 1—Primary battery pack in the battery bay 2—Optional external battery pack 3—Battery pack in the left MultiBay of the MEU 4—Battery pack in the right MultiBay of the MEU ■...

  • Page 39: Using A New Battery Pack

    Battery Packs Using a New Battery Pack Charge the battery pack in the notebook battery bay while connected to an external power source or while docked in the MEU. A new battery pack should be fully charged before it is used for the first time.

  • Page 40: Replacing The Primary Battery Pack

    Battery Packs Replacing the Primary Battery Pack 1. If the battery pack in the battery bay is the only power source, initiate Hibernation. ✎ Drive activity may delay Hibernation. 2. Close the display. 3. Remove or insert the battery pack: To remove the battery pack, turn the notebook bottom side up.
  • Page 41 Battery Packs To insert the battery pack, turn the notebook bottom side up. a. Slide the left primary battery release latch forward 1 . b. Slide the right primary battery release latch forward and hold it in place 2 . c.

  • Page 42: Replacing An Optional External Battery Pack

    Battery Packs Replacing an Optional External Battery Pack 1. If the optional external battery pack is the only power source, initiate Hibernation. ✎ Drive activity may delay Hibernation. 2. Close the display. 3. Remove or insert the external battery pack: To remove the optional external battery pack, turn the notebook bottom side up.
  • Page 43 Battery Packs If the optional external battery pack is being inserted for the first time, make sure the external battery pack plugs are removed. To remove the plugs, turn the notebook bottom side up. a. Slide the external battery release latches toward the inside of the notebook 1 .
  • Page 44 Battery Packs To insert the external battery pack, turn the notebook bottom side up. a. Slide the external battery release latches toward the inside of the notebook 1 . b. Align the green arrow on the notebook with the arrow on the battery contact post, then insert the external battery pack into the notebook until the contacts connect 2 .

  • Page 45: Storing A Battery Pack

    Battery Packs Storing a Battery Pack If a notebook will be unused and unplugged for more than 2 weeks, remove and store the battery pack. Ä CAUTION: To prevent damage to a battery pack, do not expose it to high temperatures for extended periods of time. To prolong the charge of a stored battery pack, place it in a cool, dry place.

  • Page 46: Drives

    Drives Caring for Drives Drives are fragile computer components that must be handled with care. Ä CAUTION: To prevent damage to the computer and drive and loss of information, ensure that you are discharged of static electricity before handling a drive. Refer to the Maintenance, Shipping, and Travel guide on this CD for more cautions on handling drives.
  • Page 47 Drives 4. Turn the computer bottom side up. 5. Remove the Torx T8 screws securing the palm rest. 5–2 Hardware Guide...
  • Page 48 Drives 6. Turn the computer top side up with the front facing forward. 7. Open the computer. 8. Slowly lift up the inside edge of the palm rest 1 until the real time clock (RTC) battery 2 and pointing device cables 3 prevent the palm rest from lifting any farther.
  • Page 49 Drives 9. While holding the palm rest at a 45-degree angle, slide the front edge of the palm rest away from the base of the notebook 1 . 10. After the front edge of the palm rest clears the base assembly, swing the outside edge of the palm rest up and back 2 , and rest the palm rest on the keyboard 3 .
  • Page 50 Drives 11. Remove the hard drive spacer 1 from the base assembly. 12. Grasp the hard drive tab and slide the hard drive to the left 2 . 13. Remove the hard drive 3 . 14. Place the removed hard drive in an electrostatic-safe container.

  • Page 51: Inserting A Hard Drive

    Drives Inserting a Hard Drive Ä CAUTION: To prevent damage to the computer and hard drive and loss of information, shut down the computer before inserting the hard drive into the hard drive compartment. Do not insert the hard drive while the computer is on, in Standby or in Hibernation. If you are not sure whether the computer is in Hibernation, turn the computer on, then shut it down.

  • Page 52: Audio And Video

    Audio and Video Using Audio Features The notebook provides the internal and external audio features shown in the following figure and table. Hardware Guide 6–1...
  • Page 53 Audio and Video Audio Components Feature Function Speaker Provides audio playback of multimedia applications. When using the notebook in an optional Mobile Expansion Unit (MEU), the speaker will be disabled and system sounds will be played through the MEU speakers. Refer to the documentation included with the MEU for additional information.

  • Page 54: Connecting A Stereo Speaker Or Headphone

    Audio and Video Connecting a Stereo Speaker or Headphone When connecting a device to the stereo speaker/headphone jack: ■ Use only a 3.5-mm stereo plug. ■ Use industry-standard PC headphones or external-powered speakers. The stereo speaker/headphone jack disables the notebook speaker when an external audio device is plugged into the jack.

  • Page 55: Using Video Features

    Audio and Video ■ Keyboard hotkeys Fn+F5 ❏ To raise or lower the volume, press then move the Fn+F5, on-screen slide rule or press the keyboard arrow keys. ❏ To mute or restore volume, press or press Fn+F5+M Fn+F5, then select or clear the Mute check box. ■...

  • Page 56: Connecting A Device To The Composite Video-Out Jack

    Audio and Video Connecting a Device to the Composite Video-Out Jack You will need a standard composite video cable available from most television, VCR, or electronics retailers. To connect a video device to the composite video-out jack: 1. Connect the composite video cable to the composite video-out jack on the notebook.

  • Page 57: External Device Connections

    External Device Connections The jacks and connectors described in this guide support the standard external devices that specify them. ■ For information about which jack or connector to use, refer to the documentation included with the device. ■ For information about installing or loading any software, such as drivers required by the device, refer to the device documentation, your operating system documentation, or the device manufacturer’s Web site.

  • Page 58: Connecting An External Monitor

    External Device Connections Connecting an External Monitor Ä CAUTION: To prevent damage to the notebook, turn off the monitor before connecting it to the notebook or disconnecting it from the notebook. To prevent damage to the notebook display, do not place an external monitor or any other object on top of the notebook when the notebook is closed.

  • Page 59: Connecting Infrared Equipment

    External Device Connections Connecting Infrared Equipment The infrared port allows communication between the notebook and another infrared-equipped device by producing an invisible beam of infrared light between the devices. Infrared performance varies depending on equipment, distance between infrared devices, and applications being used. The infrared port is IrDA-compliant and supports both low-speed connections up to 115 kilobits per second (Kbps) and high-speed connections up to 4 megabits per second (Mbps).

  • Page 60: Infrared Configuration Guidelines

    External Device Connections ■ Avoid interference from remote control units, such as wireless headphones or audio devices, pointed at the infrared ports. ■ Avoid direct sunlight, fluorescent light, or flashing incandescent light close to the infrared ports. ■ Keep the path between the infrared ports free of any objects that might interfere with data transmission.

  • Page 61: Connecting Usb Equipment

    External Device Connections ■ While the Infrared Monitor Search is enabled: ❏ You can establish an infrared link. ❏ The system cannot initiate Standby. User-initiated Standby is not affected. ■ When the Infrared Monitor Search is disabled: ❏ Power is conserved. ❏...

  • Page 62: Connecting A Modem

    External Device Connections Connecting a Modem Using the RJ-11 Cable The modem cable may have noise suppression circuity that prevents interference with TV and radio reception. The modem cable must be connected to an analog telephone line. Ä CAUTION: Jacks for digital PBX systems may resemble analog telephone jacks, but are not compatible with the modem.

  • Page 63: Using A Country-Specific Modem Cable Adapter

    External Device Connections Using a Country-Specific Modem Cable Adapter Software for the internal modem supports multiple countries, but telephone jacks vary by country. To use the modem and the RJ-11 cable outside the country in which you purchased the notebook, you must obtain a country-specific modem adapter and define your location in Dialing Properties.

  • Page 64: Connecting A Network Cable

    External Device Connections Connecting a Network Cable A network cable has an 8-pin RJ-45 network connector at each end and may contain noise suppression circuitry, which prevents interference with TV and radio reception. 1. Orient the end of a network cable with noise suppression circuitry 1 toward the RJ-45 network jack on the notebook.

  • Page 65: Connecting An Optional External Multibay

    External Device Connections Connecting an Optional External MultiBay 1. Connect the single-connector end of the External Multibay Powered USB Cable 1 to the external multibay connector. Be sure the pin on the connector is inserted completely in the pin slot. 2.

  • Page 66: Connecting To Wireless Devices

    External Device Connections Connecting to Wireless Devices The MultiPort allows you to connect a wireless device such as the 802.11b MultiPort Module or Bluetooth MultiPort Module to the notebook. The wireless device provides connection between the notebook and a networked access point. Refer to the documentation included with the wireless device for hardware and software installation procedures, or consult an authorized Compaq dealer for information on using wireless...

  • Page 67: Notebook Upgrades And Add-Ons

    Notebook Upgrades and Add-ons The notebook supports several accessories for you to upgrade and add on to your system. To order accessories, visit the Compaq Web site at or refer to the Worldwide Telephone http://www.compaq.com, Numbers booklet included with your notebook to contact a Compaq authorized dealer, reseller, or service provider.

  • Page 68: Upgrading Memory

    Notebook Upgrades and Add-ons 2. Disconnect all external devices connected to the notebook. 3. Disconnect the AC adapter and remove all battery packs from the notebook. 4. Use a Torx T8 screwdriver to remove screws. As you remove screws from the notebook, store them away from the work area.

  • Page 69: Inserting And Removing A Memory Expansion Board

    Notebook Upgrades and Add-ons Inserting and Removing a Memory Expansion Board Å WARNING: Failure to unplug the power cord and remove all battery packs before installing a memory expansion board can damage the equipment and expose you to the risk of electrical shock. If a memory board is already installed, remove it.
  • Page 70 Notebook Upgrades and Add-ons 5. Insert the memory expansion board into the empty memory expansion slot at a 45-degree angle 1 , then slide it gently into place until it is seated while tilted. ✎ All memory expansion boards supported by the notebook are keyed (notched) to ensure correct positioning.
  • Page 71 Notebook Upgrades and Add-ons Inserting a Memory Expansion Board on the System Board 1. Shut down the notebook. 2. Close the display. 3. Remove the AC Adapter and all battery packs. 4. Turn the notebook bottom side up and remove the 4 screws securing the palm rest to the base assembly.
  • Page 72 Notebook Upgrades and Add-ons 7. Slowly lift the inside edge of the palm rest 1 until the real time clock (RTC) battery 2 and pointing device cables 3 prevent it from lifting any further. 8. While holding the palm rest at a 45-degree angle, slide the outside edge of the palm rest away from the base assembly 1 .
  • Page 73 Notebook Upgrades and Add-ons 9. After the outside edge of the palm rest clears the base assembly, swing the outside edge of the palm rest up and back 2 , and rest the palm rest on the keyboard 3 . If a memory board is already installed, remove it.

  • Page 74: Removing A Memory Expansion Board

    Notebook Upgrades and Add-ons Removing a Memory Expansion Board To remove a memory expansion board from the memory slot in the memory compartment or system board, follow the instructions for inserting a memory expansion board to access the memory slot, then: 1.

  • Page 75: Upgrading Or Adding A Modem Or Nic

    Notebook Upgrades and Add-ons Upgrading or Adding a Modem or NIC To remove or install a modem or network interface card (NIC): 1. Turn the notebook bottom side up and remove the screws securing the palm rest. 2. Turn the notebook top side up. 3.
  • Page 76 Notebook Upgrades and Add-ons 5. Slowly lift the inside edge of the palm rest 1 until the real time clock (RTC) battery 2 and pointing device cables 3 prevent it from lifting any further. 6. While holding the palm rest at a 45-degree angle, slide the outside edge of the palm rest away from the base assembly 1 .
  • Page 77 Notebook Upgrades and Add-ons 8. If a modem/NIC board is already installed, disconnect the modem/NIC cable from the board 1 . 9. Remove the board by pulling away the plastic retention clips 2 on each side of the board. The board tilts upward. 10.
  • Page 78 Notebook Upgrades and Add-ons 12. To add a new modem/NIC board, align the keyed end of the board with the keyed area of the modem slot. Carefully insert the board into the modem slot 1 at a 45-degree angle and press down on the board 2 .

  • Page 79: Adding And Using Pc Cards

    Notebook Upgrades and Add-ons To find additional modem and NIC information, refer to the following documents: ■ The installation and operation guide included with your new modem or NIC accessory kit. ■ Modem and Networking guide, for configuring the modem and installing software.

  • Page 80: Inserting A Pc Card

    Notebook Upgrades and Add-ons Inserting a PC Card Ä CAUTION: To prevent damage to the connectors, use minimal pressure as you insert a PC Card into a PC Card slot. 1. Eject the weight saver from the CardBus slot if you have not already done so.

  • Page 81: Removing A Pc Card

    Notebook Upgrades and Add-ons Removing a PC Card Ä CAUTION: Failure to remove a PC Card that extends beyond the notebook before transporting the notebook may cause permanent damage to the PC Card connectors. If the notebook is on, click the command to stop the PC Card before you remove it.

  • Page 82: Conserving Energy

    Notebook Upgrades and Add-ons Conserving Energy When PC Cards are installed in your notebook, they draw power from the system even when they are not in use. To conserve power, remove PC Cards when they are not being used. Installing Additional Device Drivers Device drivers are programs or data files containing information needed to run a particular PC Card.

  • Page 83: Upgrading The Hard Drive

    Notebook Upgrades and Add-ons Upgrading the Hard Drive Depending on your model, the primary hard drive can be upgraded to a larger capacity. Contact your authorized Compaq dealer for optional hard drives available for your notebook. See Chapter 5, “Drives,” for instructions on removing and installing a hard drive.

  • Page 84: Specifications

    Specifications This product is a Class B digital device, pursuant to Part 15 of the FCC Rules. For more Class B information, refer to the Regulatory and Safety Notices guide on the Documentation Library CD included with your notebook. Notebook Dimensions Dimension U.S.
  • Page 85 Specifications Operating Environment (Continued) Factor U.S. Metric Maximum Altitude (nonpressurized) Operating 10,000 ft 3,048 m Nonoperating 30,000 ft 9,144 m Rated Power Input Input Power Rating Operating voltage 100–120/220–240 VAC RMS Operating current 2.7/0.6 A RMS Operating frequency range 50–60 Hz AC When powered by a DC source 18.5V MAX ✎...
  • Page 86 Specifications Modem Specifications Temperatures Operating 32° to 167° F (0° to 75° C) Storage -40° to 167° F (-40° to 75° C) Relative Humidity (noncondensing) Operating -10 to 90% (-10 to 90%) Storage -5 to 95%@102° F (-5 to 95%@ 39° C) ■...
  • Page 87 Index 3-to-2-prong plug adapter resolving low battery 2–12 condition 4–3 safety 4–9 storing 4–9 AC Adapter 2–12 supported 4–1 AC power connector 2–7 using a new pack 4–3 access door, ROM 2–9 bottom components 2–8 adapter, country-specific buttons modem 2–13 default assignments 3–9 add-ons and upgrades 8–1 Easy Access 2–2...
  • Page 88 Index COM port settings 9–2 command set, modem 2–12 device drivers, installing 8–16 components display AC Adapter 2–12 brightness adjustment 3–2 additional standard 2–11 connecting 7–2 bottom 2–8 Fn command Fn+F4 3–4 fan 2–9 release latch 2–1 front 2–1 switch 2–3 left side 2–7 Documentation Library CD power 2–12...
  • Page 89 Index microphone 6–2 RJ-11 2–6 hard drive RJ-45 2–6 7–8 inserting 5–6 stereo speaker 6–2 installing 8–17 video support 6–4 removing a drive 5–1 video-out 6–5 removing spacer 5–5 Hardware Guide 2–12 hardware setup 1–1 latches, battery release 2–8 headphones, headset left side components 2–7 (optional) lights...
  • Page 90 Index Mobile Expansion Unit Fn command Fn+num lk (MEU) (optional) 7–5 3–7 modem Fn command Fn+shift 3–8 adapter 2–13 shifting to standard keys cable 2–12 3–8 connecting internationally 7–7 operating environment country-specific adapter specifications 9–1 7–7 optional applications, installing 8–9 installing 1–7 specifications 9–3 Modem and Networking 2–12...
  • Page 91 Index slot, security cable 7–10 software Quick Controls preinstalled 2–13 Fn command Fn+F6 3–5 QuickRestore 2–13 initiating 3–2 setup 1–6 Quick Reference, hotkeys and Software Guide 2–12 shortcut keys 3–2 speaker, internal 2–9 6–2 QuickRestore 2–13 specifications 9–1 Standby button 2–2 rated power input 9–2 startup sequence 5–6 rear panel components 2–10...
  • Page 92 Index vents 2–1 2–7 video devices (optional), connecting external 7–2 video features 6–4 video mode 6–5 video-out jack 2–10 6–5 volume adjusting 3–2 6–3 buttons 2–1 6–2 Fn command Fn+F5 3–5 6–4 wireless device connecting 7–9 Fn command Fn+F2 3–4 Index–6 Hardware Guide...

This manual is also suitable for:

Evo n410c series

Table of Contents