Subscribe to Our Youtube Channel
Related Manuals for Malmbergs EVON Dual
Summary of Contents for Malmbergs EVON Dual
- Page 1 Modell / Malli / Model: xxxxx 27 006 31, 77-79 EVON DUAL WiFi/Bluetooth/4G NOTE! Please read through the manual carefully before using the appliance and keep it for future reference.
-
Page 3: Table Of Contents
WiFi Charging Station for Electric Vehicles Content ABOUT THIS MANUAL 1.1 Function of this manual 1.2 Disclaimer 1.3 Abbreviations SAFETY AND WARNINGS PRODUCT OVERVIEW TECHNICAL SPECIFICATIONS INSTALLATION 8-11 5.1 Check upon delivery 5.2 Install the back plate 5.3 Connect power cable 5.4 Connect network cable and insert SIM card 5.5 Plug the core box into the back plate CONFIGURE NETWORK... -
Page 4: About This Manual
• Do basic maintenance tasks 1.2 Disclaimer Malmbergs shall not be liable for any damages, losses, costs or expenses resulting from the improper handling of the charging station, in particular resulting from noncompliance with the instructions of this document and other applicable regulations and standards (e.g. installation, transport, occupa- tional health and other safety standards). -
Page 5: Safety And Warnings
SAFETY AND WARNINGS Caution • Failure to follow instructions may result in danger. • Children are prohibited from touching the charging station. • Do not disassemble the charging station while connected to the mains. • Install the charging station away from pyrotechnics, dusty or corrosive places. •... -
Page 6: Product Overview
PRODUCT OVERVIEW 1. RCBO Cable version: 27 006 78-79 2. Energy meter 3. Charging station 4. LED indicator 5. Charging connector 6. Charging cable/Charging socket 7. Power cable inlet/outlet (top side) 8. Back plate 9. Power cable inlet’outlet (rear side) 10. -
Page 7: Technical Specifications
TECHNICAL SPECIFICATIONS Art.no. 27 006 31 27 006 77 27 006 78 27 006 79 Power supply 3P+N+PE Rated voltage 400V AC Input Rated current Frequency 50/60Hz Output voltage 400V AC Maximum current Output power 2x11kW / 1x22kW Output Connector type 2x Type 2 Socket 2x Type 2 Cable Charging cable... -
Page 8: Installation
For and on behalf of: IEC 62321-3-1:2013, IEC 62321-4:2013+A1:2017, IEC 62321-5:2013, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-6:2015, IEC 62321-8:2017 Malmbergs Elektriska AB, Sweden. RF & Health Mr. Anders Folke / Product Manager EN 300 328 V2.2.2:2019, EN 300 330 V2.1.1:2017, Date: 08/07/2024 EN 301 489-1 V2.2.3:2019, EN 301 489-3 V2.1.1:... -
Page 9: Install The Back Plate
5.2 Install the back plate 320 mm 170 mm Ø7 170 mm Installation Diagram 4-M6x40 5.3 Connect power cable Top cabling Rear cabling TT/TN Single-phase IT For three-phase IT wiring, in addition to the regular wring, the L2 and N lines Bottom cabling should be short-circuited. -
Page 10: Connect Network Cable And Insert Sim Card
Method 1: Series Connection (Max. 100A) 5.4 Connect network cable Connect RS485 cable Insert SIM card Ethernet RS485 4G card Ethernet cable: Method 2: Parallel Connection T568A T568B RS485 cable: SIM card:... -
Page 11: Plug The Core Box Into The Back Plate
5.5 Plug the core box into the back plate CONFIGURE NETWORK Decide what internet connection should be used for the installation. There are three types of internet connection that is possible to use for installation. a). Ethernet cable from the router/switch. b). - Page 12 Private scenario: If you use the charging station in a private scenario, you can bind the charging station to the Evchargo APP directly, please go to page 14 to check the Evchargo user manual to get more information. Public scenario: If you use the charging station in a public scenario, please connect your charging station to the Evchargo cloud platform by logging in and following the instructions, and then config- ure the charging station’s network in AP mode as shown below.
-
Page 13: Conduct A Function Test
Step 4: Configure WiFi After logging in, you will be prompted with the following interfaces: Choose WiFi as your charging station's communication method. Choose a WiFi hotspot. Enter the WiFi password wss://ocpp16.evchargo. com:33033 Choose the grid type: TN, TT or IT. Click to complete the Network configuration wss://ocpp16.evchargo.com:33033 is an address that connects your charging station to a cloud... -
Page 14: Connect The Charging Station To Evchargo Cloud
CONNECT THE CHARGING STATION TO EVCHARGO CLOUD Evchargo cloud is a cloud platform for business operators to meet the needs for charging station monitoring and management, as well as smart and efficient operations and maintenance. The platform account and password will be sent to your email. For the instructions for Evchargo cloud, please scan the QR code below: Instructions for Evchargo cloud USE EVCHARGO APP TO CHARGE ELECTRIC VEHICLE... -
Page 15: Troubleshooting
TROUBLESHOOTING Problems LED Status Warning (Ground fault, Solid yellow light tampering, etc.) Relay adhesion Solid red light Leakage current fault The LED blinks red once and then goes out for 3s, cycling. CP fault The LED blinks red twice and then goes out for 3s, cycling. Over current fault The LED blinks red three times and then goes out for 3s, cycling. - Page 16 Malmbergs Elektriska AB, PO Box 144, SE-692 23 Kumla, SWEDEN Phone: +46 19 58 77 00 info@malmbergs.com www.malmbergs.com...
Need help?
Do you have a question about the EVON Dual and is the answer not in the manual?
Questions and answers