Yamaha STAR VENTURE 2011 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. STAR VENTURE 2011
  6. Owner's manual
Yamaha STAR VENTURE 2011 Owner's Manual

Yamaha STAR VENTURE 2011 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Read this manual carefully before operating this vehicle.
OWNER'S MANUAL
XVZ13TFSB(C)
LIT-11626-25-41
1BM-28199-11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STAR VENTURE 2011 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Yamaha STAR VENTURE 2011

Summary of Contents for Yamaha STAR VENTURE 2011

  • Page 1 Read this manual carefully before operating this vehicle. OWNER’S MANUAL XVZ13TFSB(C) LIT-11626-25-41 1BM-28199-11...
  • Page 2 EAU10042 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
  • Page 3 Yamaha has met these standards without reducing the performance or economy of operation of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the recommended maintenance schedules and operating instructions contained within this manual.

  • Page 4: Important Manual Information

    IMPORTANT MANUAL INFORMATION EAU10133 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 5 IMPORTANT MANUAL INFORMATION EAU10193 XVZ13TFSB(C) OWNER’S MANUAL ©2011 by Yamaha Motor Corporation, U.S.A. 1st edition, July 2011 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Printed in Japan.

  • Page 6: Table Of Contents

    TABLE OF CONTENTS LOCATION OF IMPORTANT Rider seat ........4-14 Starting a warm engine ....7-2 LABELS ..........1-1 Helmet holders ......4-15 Shifting ........... 7-2 Sidecases and travel trunk ... 4-16 Engine break-in ......7-4 SAFETY INFORMATION ....2-1 Adjusting the front fork ....4-18 Parking ...........
  • Page 7 Reporting safety defects ....11-3 Checking and lubricating Motorcycle noise regulation ..11-4 the brake and shift pedals ..8-29 Maintenance record ..... 11-5 Checking and lubricating YAMAHA MOTOR the brake and clutch levers ..8-29 CORPORATION, U.S.A. ® Checking and lubricating ROYAL STAR™ VENTURE the sidestand ......8-30...

  • Page 8: Location Of Important Labels

    Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer.
  • Page 9 LOCATION OF IMPORTANT LABELS NOTICE Cleaning with alkaline or acid cleaner, gasoline or solvent will damage windshield. Use neutral detergent. 4B5-2815K-00 4 California only...

  • Page 10: Safety Information

    SAFETY INFORMATION EAU10289 Safe Riding • Ride where other motorists can Perform the pre-operation checks each see you. Avoid riding in another time you use the vehicle to make sure it motorist’s blind spot. Be a Responsible Owner ● is in safe operating condition. Failure to Many accidents involve inexperi- As the vehicle’s owner, you are respon- inspect or maintain the vehicle properly...
  • Page 11 SAFETY INFORMATION ● ● due to excessive speed or under- This motorcycle is designed for on- A passenger should also observe cornering (insufficient lean angle road use only. It is not suitable for the above precautions. for the speed). off-road use. •...
  • Page 12 Yamaha accessories, which are avail- of the motorcycle is changed. To avoid to minimize imbalance or instabili- able only from a Yamaha dealer, have the possibility of an accident, use ex- been designed, tested, and approved ●...
  • Page 13 ● ucts similar in design and quality to • Accessories fitted to the handle- Use caution when adding electri- genuine Yamaha accessories, recog- bar or the front fork area can cal accessories. If electrical acces- nize that some aftermarket accessories...
  • Page 14 SAFETY INFORMATION ● Check that the fuel cock (if equipped) is in the “OFF” position and that there are no fuel leaks. ● Point the front wheel straight ahead on the trailer or in the truck bed, and choke it in a rail to pre- vent movement.

  • Page 15: Description

    DESCRIPTION EAU10410 Left view 6,7 8 1. Shift pedal (page 4-9) 9. Helmet holder (page 4-15) 2. Starter (choke) knob (page 4-14) 10.Tail/brake light (page 8-36) 3. Fuel tank cap (page 4-10) 11.Rear turn signal light (page 8-36) 4. Fuel cock (page 4-13) 5.

  • Page 16: Right View

    DESCRIPTION EAU10420 Right view 5 6 7 8 9 1. Muffler 9. Fuel tank (page 4-10) 2. Owner’s tool kit (page 8-2) 10.Front fork air valve (page 4-18) 3. Helmet holder (page 4-15) 11.Headlight (page 8-35) 4. Travel trunk (page 4-16) 12.Front turn signal/position lights (page 8-36) 5.

  • Page 17: Controls And Instruments

    DESCRIPTION EAU10430 Controls and instruments 1. Clutch lever (page 4-9) 9. Brake lever (page 4-10) 2. Audio system/CB radio control unit (page 5-3) 3. Left handlebar switches (page 4-7) 4. Rider headset jack (page 5-2) 5. Speedometer unit (page 4-4) 6.

  • Page 18: Instrument And Control Functions

    INSTRUMENT AND CONTROL FUNCTIONS EAU10460 EWA10061 2. Push the key in from the “OFF” po- Main switch/steering lock WARNING sition, and then turn it to “LOCK” while still pushing it. Never turn the key to “OFF” or “LOCK” while the vehicle is moving. 3.

  • Page 19: Indicator Lights And Warning Lights

    INSTRUMENT AND CONTROL FUNCTIONS The key cannot be removed. EAU49391 Indicator lights and warning lights 1. Cruise control indicator lights 2. Right turn signal indicator light “ ” 3. Neutral indicator light “ ” 4. Coolant temperature warning light “ ”...
  • Page 20 This warning light comes on or flashes or deceleration, but this is not a mal- tral position or pull the clutch lever. if a problem is detected in the electrical function. circuit monitoring the engine. If this oc- curs, have a Yamaha dealer check the...

  • Page 21: Speedometer Unit

    “ON”, (see page 4-2), the odometer display or if the warning light remains on, have will automatically change to the fuel re- a Yamaha dealer check the electrical serve tripmeter mode “TRIP F” and circuit. start counting the distance traveled 1.

  • Page 22: Cruise Control System

    4. Push the “RESET” button to set play segments will start flashing. If this To activate and set the cruise control the minutes. occurs, have a Yamaha dealer check system 5. Push the “SELECT” button to start the electrical circuit.
  • Page 23 INSTRUMENT AND CONTROL FUNCTIONS grip is released. However, if the speed is increased by more than 8 km/h (5 mi/h), the cruise control system will be deactivated until the traveling speed is within 8 km/h (5 mi/h) of the set speed. Deactivating the cruise control sys- Applying the front or rear brake or dis- engaging the clutch will automatically...

  • Page 24: Self-Diagnosis Device

    EWA11071 will come on or flash. If this occurs, WARNING have a Yamaha dealer check the vehi- If the cruise control system is not cle. working correctly, the “SET” and ECA11170 “RES” indicator lights will flash si- NOTICE multaneously.
  • Page 25 INSTRUMENT AND CONTROL FUNCTIONS Right EAU12430 EAU12660 Turn signal switch “ ” Engine stop switch “ ” To signal a right-hand turn, push this Set this switch to “ ” before starting switch to “ ”. To signal a left-hand the engine.

  • Page 26: Clutch Lever

    INSTRUMENT AND CONTROL FUNCTIONS The hazard lights are used in case of EAU12820 EAU12881 Clutch lever Shift pedal an emergency or to warn other drivers when your vehicle is stopped where it might be a traffic hazard. ECA10061 NOTICE Do not use the hazard lights for an extended length of time with the en- gine not running, otherwise the bat- tery may discharge.

  • Page 27: Brake Lever

    INSTRUMENT AND CONTROL FUNCTIONS EAU12890 EAU12941 EAU13122 Brake lever Brake pedal Fuel tank cap 1. Brake lever 1. Brake pedal 1. Fuel tank cap lock cover 2. Unlock. The brake lever is located at the right The brake pedal is on the right side of handlebar grip.

  • Page 28: Fuel

    INSTRUMENT AND CONTROL FUNCTIONS EAU13212 Fuel The fuel tank cap cannot be installed Make sure there is sufficient gasoline in unless the key is in the lock. In addition, the tank. the key cannot be removed if the cap is EWA10881 WARNING not properly installed and locked.

  • Page 29: Fuel Tank Breather/Overflow Hose

    ● Check the fuel tank breather/over- flow hose for cracks or damage, Your Yamaha engine has been de- and replace it if damaged. signed to use regular unleaded gaso- ● Make sure that the end of the fuel...

  • Page 30: Fuel Cock

    INSTRUMENT AND CONTROL FUNCTIONS EAU13550 This indicates reserve. With the fuel Fuel cock cock lever in this position, the fuel re- The fuel cock supplies fuel from the serve is made available. Turn the fuel tank to the carburetors while also filter- cock lever to this position if you run out ing it.

  • Page 31: Starter (Choke) Knob

    INSTRUMENT AND CONTROL FUNCTIONS EAU13600 EAU13780 EAU14240 Starter (choke) knob “ ” Locking the steering with a Rider seat padlock To remove the rider seat Remove the nuts, and then pull the rid- er seat up. 1. Starter (choke) knob “ ”...

  • Page 32: Helmet Holders

    INSTRUMENT AND CONTROL FUNCTIONS EAU50730 Helmet holders There is a helmet holder on each side of the travel trunk. To open a helmet holder Insert the key into the helmet holder lock, and then turn it as shown. 1. Projection 1.

  • Page 33: Sidecases And Travel Trunk

    INSTRUMENT AND CONTROL FUNCTIONS EAU14635 conditions may make it neces- Sidecases and travel trunk sary to further reduce the riding EWA11083 speed. WARNING Improper loading or overloading can Sidecases cause loss of control and possibly an accident or personal injury. See To open a sidecase pages 2-3 and 8-22 for important 1.
  • Page 34 INSTRUMENT AND CONTROL FUNCTIONS To close the travel trunk ECA10921 NOTICE 1. Fold the travel trunk lid up com- pletely, and then fold it down. To avoid locking the key in, never lock either sidecase or the travel trunk and remove the key from the lock before closing the lid.

  • Page 35: Adjusting The Front Fork

    ● A low-pressure air gauge and an air pump are required to adjust the spring rate. These items are avail- able at a Yamaha dealer. 2. Remove the front fork air valve cap from each fork leg. 4-18...

  • Page 36: Adjusting The Shock Absorber Assembly

    An air pump is required to adjust the spring rate. This item is avail- sion, decrease the air pressure by pushing the valve stem down. able at a Yamaha dealer. 2. Remove the shock absorber as- sembly air valve cap. 4-19...

  • Page 37: Sidestand

    EAU15314 Sidestand Ignition circuit cut-off system Yamaha dealer repair it if it does not The sidestand is located on the left side The ignition circuit cut-off system (com- function properly. of the frame. Raise the sidestand or...
  • Page 38 INSTRUMENT AND CONTROL FUNCTIONS WARNING With the engine turned off: 1. Move the sidestand down. If a malfunction is noted, have a Yamaha 2. Make sure that the engine stop switch is set to “ ”. dealer check the system before riding.

  • Page 39: Auxiliary Dc Jack And Connector

    INSTRUMENT AND CONTROL FUNCTIONS EAU15417 2. Open the auxiliary DC jack cap. Auxiliary DC jack and connec- EWA11051 WARNING To prevent electrical shock or short- circuiting, make sure that the caps are installed when the auxiliary DC jack and connector are not being used.

  • Page 40: Audio System And Cb Radio

    AUDIO SYSTEM AND CB RADIO EAU15440 Location of parts 1. Audio system/CB radio control unit 7. Cassette deck compartment 2. Front speaker 8. Auxiliary audio input jack 3. Rider headset jack 9. Rear speaker 4. Cassette deck lid 10.Passenger volume control knob 5.

  • Page 41: Headsets (Optional)

    When cleaning the control unit sion, a headset is necessary; however, display, use a neutral detergent. CB reception is possible without a Never strong abrasive headset. For intercom use, two head- cleaning products, fuel (gaso- sets are necessary. Consult a Yamaha line), thinner, etc.

  • Page 42: Control Unit

    AUDIO SYSTEM AND CB RADIO ● EAU15462 Selecting a track on the optional Control unit CD changer (Tape) ● Selecting a CB channel ● Adjusting the CB squelch level (Auxiliary (CD changer*) ● Tuning in a radio station manually audio source) ●...

  • Page 43: Making Basic Settings

    AUDIO SYSTEM AND CB RADIO Audio system Long push (one second or more) EAU15480 Making basic settings ● Turning off the CB radio BASS TREB SP/HS (Treble) (Fade ) (Output) Turning on/off the audio system Radio (Auto (Intercom frequency volume) volume) This mode does not appear in the display when the headsets are selected as the output.
  • Page 44 AUDIO SYSTEM AND CB RADIO Adjusting the audio system volume Turning on/off the CB radio be set between “0” and “20”. After the adjustment is made, the CB radio re- turns to normal operation and the CB channel appears in the display. 1.

  • Page 45: Making Mode Settings

    AUDIO SYSTEM AND CB RADIO EAU15502 Audio system Selecting the output (speakers or Making mode settings headsets) BASS TREB SP/HS (Treble) (Fade ) (Output) General procedure The following setting procedure applies Radio to the audio system, CB radio, and op- (Auto (Intercom frequency...
  • Page 46 AUDIO SYSTEM AND CB RADIO Adjusting the bass level Adjusting the treble level Adjusting the fade level (balance be- tween front and rear speakers) 1. Repeatedly push the “SELECT” 1. Repeatedly push the “SELECT” button for less than one second button for less than one second 1.
  • Page 47 AUDIO SYSTEM AND CB RADIO Adjusting the auto volume Turning on/off the CB roger beep When the fade level is set to “0”, the front and rear speaker levels are the same. Adjusting the intercom volume When riding the vehicle, external noise 1.

  • Page 48: Cassette Deck Operation

    AUDIO SYSTEM AND CB RADIO ● EAU15520 EWA11380 To clean the tape head, use a Cassette deck operation WARNING de-magnetizing cleaning cas- ● sette, but be sure to turn the vol- It is dangerous to operate the cassette deck while riding. Nev- ume all the way down to avoid er take your hands off the han- speaker damage.
  • Page 49 AUDIO SYSTEM AND CB RADIO Skipping songs Changing the tape play direction ● The maximum number of songs that can be skipped in either direc- tion is 9. ● To stop skipping songs, push the up/down switch in the opposite di- rection that songs are being skipped.

  • Page 50: Radio Operation

    AUDIO SYSTEM AND CB RADIO Turning on/off the Dolby noise re- Ejecting the cassette tape EAU15533 Radio operation duction system 1. Eject (“ ”) button 1. Radio antenna While the cassette tape is playing, push Push the eject (“ ”) button to eject the the eject (“...
  • Page 51 AUDIO SYSTEM AND CB RADIO EWA11390 Selecting a frequency band WARNING (Tape) ● It is dangerous to operate the ra- dio while riding. Never take your (Auxiliary (CD changer*) hands off the handlebars while audio source) riding. * The CD mode appears in the display only ●...
  • Page 52 AUDIO SYSTEM AND CB RADIO tunes in the first station that has a played. The frequency changes in Programming preset radio stations strong enough signal to be re- 0.2-MHz steps for FM and in 10- manually ceived. kHz steps for AM. Tuning in a radio station manually Tuning in a preset radio station Up to six stations can be programmed...
  • Page 53 AUDIO SYSTEM AND CB RADIO 3. Repeatedly push either side of the 3. Push either side of the up/down Up to six stations can be programmed up/down switch for less than one switch once for one second or automatically for each frequency band second until the desired preset more to tune in a station automati- (FM1, FM2, FM3, and AM) as follows.

  • Page 54: Optional Cd Changer Operation

    Selecting a CD An optional six-disc CD changer can be mounted in the travel trunk. Ask a Yamaha dealer to install the genuine Clarion CDC635 model. Playing a CD Repeatedly push either side of the...

  • Page 55: Cb Radio Operation

    AUDIO SYSTEM AND CB RADIO Selecting a CD track EAU15551 EWA11410 CB radio operation WARNING Repeatedly push either side of the up/down switch for less than one sec- ● It is dangerous to change CB ra- ond until the number for the desired CD dio channels or adjust the vol- track appears in the display.
  • Page 56 AUDIO SYSTEM AND CB RADIO The Citizens Band Radio Service is lessening of the operating privileges or 1. Make sure that the CB radio is under the jurisdiction of the Federal responsibilities of CB users. An opera- turned on and is selected. (See Communications Commission tor of a CB radio station is still required...
  • Page 57 AUDIO SYSTEM AND CB RADIO Adjusting the squelch level returns to normal operation and Adjusting the receiving volume the CB channel appears in the dis- play. For maximum reception sensitivity, the squelch level should be set by turning the control knob fully counterclockwise, and then slowly turning it clockwise un- til the background noise has been suffi- ciently reduced.
  • Page 58 AUDIO SYSTEM AND CB RADIO Channel information Channel Channel Frequency in MHz Channel Channel Frequency in MHz 26.965 27.215 26.975 27.225 36.985 27.235 27.005 27.245 27.015 27.255 27.025 27.265 27.035 27.275 27.055 27.285 27.065 27.295 27.075 27.305 27.085 27.315 27.105 27.325 27.115 27.335...

  • Page 59: Auxiliary Audio Source Operation

    AUDIO SYSTEM AND CB RADIO Transmitting and receiving EAU15570 Auxiliary audio source opera- tion Transmission Auxiliary audio equipment can be con- Push the rider “TALK” switch or the nected to, and played through, the au- passenger “TALK” button to transmit. dio system.
  • Page 60 AUDIO SYSTEM AND CB RADIO 5-21...

  • Page 61: For Your Safety - Pre-Operation Checks

    Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage. Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer. Before using this vehicle, check the following points:...
  • Page 62 • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 8-21, 8-28 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable and grip housing. • Make sure that operation is smooth. Control cables 8-28 •...
  • Page 63 • Tighten if necessary. Instruments, lights, signals • Check operation. — and switches • Correct if necessary. • Check operation of ignition circuit cut-off system. Sidestand switch 4-20 • If system is not working correctly, have Yamaha dealer check vehicle.

  • Page 64: Operation And Important Riding Points

    If not, ask a become familiar with all controls. If In order for the ignition circuit cut-off Yamaha dealer to check the elec- there is a control or function you do not system to enable starting, one of the trical circuit.

  • Page 65: Starting A Warm Engine

    OPERATION AND IMPORTANT RIDING POINTS er than necessary. The time necessary EAU16640 EAU16671 Starting a warm engine Shifting for starter (choke) use depends upon Follow the same procedure as for start- the ambient temperature. Tempera- ing a cold engine with the exception tures above 10 °C (50 °F) require about that the starter (choke) is not required 7 seconds of starter (choke) use and...
  • Page 66 OPERATION AND IMPORTANT RIDING POINTS ECA10260 4. At the recommended shift points 3. Shift the transmission into the neu- NOTICE shown in the following table, close tral position when the motorcycle ● the throttle, and at the same time, is almost completely stopped. The Even with the transmission in the neutral position, do not quickly pull the clutch lever in.

  • Page 67: Engine Break-In

    Yamaha dealer During this period, prolonged full-throt- ● Do not park on a slope or on soft check the vehicle.

  • Page 68: Periodic Maintenance And Adjustment

    – possibly leading to pending on the weather, terrain, geo- that is certified (if applicable). Yamaha death. See page 2-2 for more in- graphical location, and individual use, dealers are trained and equipped to...

  • Page 69: Owner's Tool Kit

    If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you.

  • Page 70: Periodic Maintenance Chart For The Emission Control System

    From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months. ● Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service. EAU17601 Periodic maintenance chart for the emission control system...
  • Page 71 PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months •...

  • Page 72: General Maintenance And Lubrication Chart

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU32186 General maintenance and lubrication chart INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months...
  • Page 73 PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months •...
  • Page 74 PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months •...
  • Page 75 (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months • Apply Yamaha chain and cable √ √ √ √ √ √ 26 * Control cables lube or engine oil thoroughly. • Check operation.

  • Page 76: Removing And Installing Cowlings And Panels

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU18712 Removing and installing cowl- ings and panels The cowlings and panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a cowling or panel needs to be re- moved and installed.
  • Page 77 PERIODIC MAINTENANCE AND ADJUSTMENT Make sure that the projection fits into the grommet. 2. Install cowling A. EAU35861 Panels A and B To remove a panel 1. Grommet 1. Cowling B Remove the bolt, and then pull the pan- 2. Projection 2.
  • Page 78 PERIODIC MAINTENANCE AND ADJUSTMENT 1. Panel B 1. Panel C EAU19333 2. Bolt 2. Screw Panel C 3. Bolt 4. Passenger footrest To install a panel To remove the panel Place the panel in the original position, 1. Remove panel B. To install the panel and then install the bolt.

  • Page 79: Checking The Spark Plugs

    Do not attempt to 1. Spark plug cap diagnose such problems yourself. In- 2. Remove the spark plug as shown, stead, have a Yamaha dealer check with the spark plug wrench includ- the vehicle. ed in the owner’s tool kit.

  • Page 80: Canister (For California Only)

    PERIODIC MAINTENANCE AND ADJUSTMENT 3. Check each spark plug for elec- To install a spark plug EAU19681 Canister (for California only) trode erosion and excessive car- 1. Clean the surface of the spark plug bon or other deposits, and replace gasket and its mating surface, and it if necessary.

  • Page 81: Engine Oil And Oil Filter Cartridge

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU19908 4. Remove the engine oil filler cap, Engine oil and oil filter car- the engine oil drain bolt and its tridge gasket to drain the oil from the The engine oil level should be checked crankcase.
  • Page 82 An oil filter wrench is available at a Tightening torque: Yamaha dealer. Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 6. Apply a thin coat of clean engine oil to the O-ring of the new oil filter 9.

  • Page 83: Final Gear Oil

    Oil quantity: for oil leakage before each ride. If any Without oil filter cartridge replace- mediately turn the engine off and leakage is found, have a Yamaha deal- ment: check for the cause. 3.50 L (3.70 US qt, 3.08 Imp.qt) er check and repair the vehicle.
  • Page 84 PERIODIC MAINTENANCE AND ADJUSTMENT 2. Remove the final gear oil filler bolt Tightening torque: Tightening torque: and its gasket, and then check the Final gear oil filler bolt: Final gear oil drain bolt: oil level in the final gear case. 23 Nm (2.3 m·kgf, 17 ft·lbf) 23 Nm (2.3 m·kgf, 17 ft·lbf) 4.

  • Page 85: Coolant

    If specified in the periodic maintenance water has been added to the and lubrication chart. coolant, have a Yamaha dealer check the antifreeze content of EAU20214 the coolant as soon as possible, To check the coolant level otherwise the effectiveness of 1.

  • Page 86: Cleaning The Air Filter Elements

    Have a periodic maintenance and lubrication Yamaha dealer change the coolant. chart. Clean or, if necessary, replace WARNING! Never attempt to remove the air filter elements more frequently if...
  • Page 87 PERIODIC MAINTENANCE AND ADJUSTMENT 7. Install the air filter element by fit- ting the projection on the air filter element into the holder in the air fil- ter case, then tightening the screws. NOTICE: Make sure that the air filter element is properly seated in the air filter case.

  • Page 88: Carburetors

    Check the engine idling speed and, if tem, which require very sophisticated necessary, have it corrected by a adjustment. Therefore, all carburetor Yamaha dealer. adjustments should be left to a Yamaha dealer, who has the necessary profes- Engine idling speed: 950–1050 r/min sional knowledge and experience.

  • Page 89: Valve Clearance

    250 kPa (2.50 kgf/cm², 36 psi) Rear: from occurring, the valve clearance the specified tires. 250 kPa (2.50 kgf/cm², 36 psi) must be adjusted by a Yamaha dealer 90–190 kg (198–419 lb): at the intervals specified in the periodic Tire air pressure Front: maintenance and lubrication chart.
  • Page 90 Size: Yamaha dealer replace the tire 150/80-16M/C 71H immediately. Brakes, tires and Manufacturer/model: related wheel parts replacement DUNLOP/D404F should also be left to a Yamaha BRIDGESTONE/G705G Rear tire: dealer. Size: ● Ride at moderate speeds after 1. Tire sidewall...

  • Page 91: Cast Wheels

    ● The wheel rims should be checked for cracks, bends, warpage or oth- er damage before each ride. If any damage is found, have a Yamaha 1. Valve stem nut dealer replace the wheel. Do not 2. Valve stem locknut attempt even the smallest repair to 1.

  • Page 92: Adjusting The Brake Lever Free Play

    ● A soft or spongy feeling in the Yamaha dealer, who has the neces- brake lever can indicate the sary professional knowledge and expe- presence of air in the hydraulic rience.

  • Page 93: Checking The Front And Rear Brake Pads

    EAU22661 Checking the front and rear Checking the brake and clutch peared, have a Yamaha dealer replace brake pads fluid levels the brake pads as a set. The front and rear brake pads must be...
  • Page 94 ● Refill with the same type of ly, have a Yamaha dealer check the brake fluid. Adding a brake fluid cause before further riding. other than DOT 4 may result in a harmful chemical reaction.

  • Page 95: Changing The Brake And Clutch Fluids

    Checking and lubricating the clutch fluids cables throttle grip and cable Have a Yamaha dealer change the The operation of all control cables and The operation of the throttle grip should brake and clutch fluids at the intervals the condition of the cables should be be checked before each ride.

  • Page 96: Checking And Lubricating The Brake And Shift Pedals

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU44272 EAU43600 Recommended lubricant: Checking and lubricating the Checking and lubricating the Lithium-soap-based grease brake and shift pedals brake and clutch levers Brake pedal The operation of the brake and clutch levers should be checked before each Shift pedal ride, and the lever pivots should be lu- bricated if necessary.

  • Page 97: Checking And Lubricating The Sidestand

    The swingarm pivots must be lubricat- The pivoting points of the rear suspen- ed by a Yamaha dealer at the intervals sion must be lubricated by a Yamaha specified in the periodic maintenance dealer at the intervals specified in the and lubrication chart.

  • Page 98: Checking The Front Fork

    WARNING! To avoid injury, of it falling over. have a Yamaha dealer check or re- [EWA10751] securely support the vehicle so 2. Hold the lower ends of the front pair it.

  • Page 99: Checking The Wheel Bearings

    (See page 4-14.) hub or if the wheel does not turn away from the battery and pro- This model is equipped with a VRLA smoothly, have a Yamaha dealer check vide sufficient ventilation when (Valve Regulated Lead Acid) battery. the wheel bearings.

  • Page 100: Replacing The Fuses

    2. If the battery will be stored for more EAU23664 Replacing the fuses Have a Yamaha dealer charge the bat- than two months, check it at least The main fuse is located behind panel tery as soon as possible if it seems to once a month and fully charge it if C.
  • Page 101 4. If the fuse immediately blows rating than recommended to again, have a Yamaha dealer avoid causing extensive dam- check the electrical system. age to the electrical system and possibly a fire.

  • Page 102: Replacing The Headlight Bulb

    4. Install the headlight bulb cover, be adversely affected. Thor- and then connect the coupler. oughly clean off any dirt and fin- 5. Have a Yamaha dealer adjust the gerprints on the headlight bulb headlight beam if necessary. using a cloth moistened with al- cohol or thinner.

  • Page 103: Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU24283 2. Remove the burnt-out bulb by EAU24350 Replacing a turn signal light Supporting the motorcycle pushing it in and turning it counter- bulb or the tail/brake light bulb Since this model is not equipped with a clockwise.

  • Page 104: Troubleshooting

    The following troubleshooting charts represent quick and easy procedures for checking these vital systems your- self. However, should your motorcycle require any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the motorcycle properly.

  • Page 105: Troubleshooting Charts

    Remove the spark plugs and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the battery. 4. Battery The engine turns over The battery is good.
  • Page 106 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.

  • Page 107: Motorcycle Care And Storage

    Be sure to consult a Yamaha dealer for ECA10732 Before cleaning the motorcycle NOTICE advice on what products to use be- 1.
  • Page 108 4. Clean the seat with Yamaha Pro- mar the paint or protective finish. When tectant or another high-quality vi- finished, start the engine and let it idle nyl upholstery cleaner to keep the for several minutes.

  • Page 109: Storage

    MOTORCYCLE CARE AND STORAGE EAU26252 2. For motorcycles equipped with a WARNING! To prevent dam- Storage fuel cock that has an “OFF” posi- age or injury from sparking, tion: Turn the fuel cock lever to make sure to ground the Short-term “OFF”.
  • Page 110 MOTORCYCLE CARE AND STORAGE cessively cold or warm place [less than 0 °C (30 °F) or more than 30 °C (90 °F)]. For more information on storing the battery, see page 8-32. Make any necessary repairs before storing the motorcycle.

  • Page 111: Specifications

    SPECIFICATIONS Dimensions: Engine oil: Radiator capacity (including all routes): 3.50 L (3.70 US qt, 3.08 Imp.qt) Overall length: Recommended brand: Air filter: 2655 mm (104.5 in) YAMALUBE Overall width: Type: Air filter element: 900 mm (35.4 in) SAE 10W-30, 10W-40, 10W-50, 15W-40, Dry element Overall height: 20W-40 or 20W-50...
  • Page 112 SPECIFICATIONS Operation: Manufacturer/model: Front brake: Left foot operation DUNLOP/D404 Type: Gear ratio: Manufacturer/model: Dual disc brake 1st: BRIDGESTONE/G702G Operation: 2.529 (43/17) Loading: Right hand operation 2nd: Maximum load: Specified brake fluid: 1.632 (31/19) 190 kg (419 lb) DOT 4 3rd: (Total weight of rider, passenger, cargo and Rear brake: 1.200 (30/25)
  • Page 113 SPECIFICATIONS Battery: Cruise control “SET” indicator light: Auxiliary DC connector fuse: 12 V, 1.7 W × 1 5.0 A Model: Cruise control “RES” indicator light: Auxiliary DC jack fuse: YTX20L-BS 12 V, 1.7 W × 1 5.0 A Voltage, capacity: Cruise control “ON”...

  • Page 114: Consumer Information

    Record the key identification number, vehicle identification number and mod- el label information in the spaces pro- vided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehi- cle is stolen. KEY IDENTIFICATION NUMBER: 1.
  • Page 115 This information illustration. This label shows specifica- will be needed when ordering spare tions related to exhaust emissions as parts from a Yamaha dealer. required by federal law, state law and Environment Canada. 11-2...

  • Page 116: Reporting Safety Defects

    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Yamaha Motor Corporation, U.S.A. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

  • Page 117: Motorcycle Noise Regulation

    CONSUMER INFORMATION EAU26560 Motorcycle noise regulation TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement of any device or element of design incorporated into any new ve- hicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

  • Page 118: Maintenance Record

    CONSUMER INFORMATION EAU26632 Maintenance record Copies of work orders and/or receipts for parts purchased and installed on your vehicle will be required to document that maintenance has been completed in accordance with the emissions warranty. The chart below is printed only as a reminder that maintenance work is required.
  • Page 119 CONSUMER INFORMATION Maintenance Date of Servicing dealer Mileage Remarks interval service name and address 36000 mi (55000 km) or 54 months 40000 mi (61000 km) or 60 months 11-6...

  • Page 120: Yamaha Motor Corporation, U.s.a. Royal Star™ Venture Limited Warranty

    CONSUMER INFORMATION EAU26703 ® YAMAHA MOTOR CORPORATION, U.S.A. ROYAL STAR™ VENTURE LIMITED WARRANTY 11-7...
  • Page 121 CONSUMER INFORMATION 11-8...
  • Page 122 CONSUMER INFORMATION 11-9...
  • Page 123 INDEX Cruise control switches ......4-9 Cruise control system......4-5 Air filter elements, cleaning ....8-19 Key identification number ..... 11-1 Audio settings (basic) ......5-4 Audio settings (modes)......5-6 Dimmer switch.........4-8 Labels, location........1-1 Audio system .......... 5-1 Auxiliary audio source ......5-20 Engine break-in ........7-4 Main switch/steering lock......
  • Page 124 INDEX Sidestand, checking and lubricating ..8-30 Wheel bearings, checking ....8-32 Sound control unit ........5-3 Wheels..........8-24 Spark plugs, checking......8-12 Specifications........10-1 Speedometer unit........4-4 Starter (choke) knob ......4-14 Starting and warming up a cold engine ........7-1 Start switch ..........
  • Page 125 Yamalube – Take care of your Yamaha with legendary Yamalube oils, lubricants, and care products. They’re formulated and approved by the toughest judges we know: the Yamaha engineering teams that know your Yamaha from the inside out.
  • Page 126 PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2011.08-0.3×1 CR...

This manual is also suitable for:

Xvz13tfsbXvz13tfsbc

Table of Contents