Advertisement

Technical Support and E-Warranty Certificate www.vevor.com/support
Park Benches
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the wkl776 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VEVOR wkl776

  • Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support Park Benches We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 Park Benches wkl776 wkl-734 XG1002 - 1 -...
  • Page 3 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 4 Park bench which used metal: Consisting of a seat frame, seat panel, backrest, and armrests etc., ASSEMBLY AND USE wkl776 and wkl-734 assembly A. Handrails * 2 B. Seat board * 1 C.Backrest * 1 D. Screw(M6X50) * 4 E. Screw(M6X55) * 4 F. Washer *8 G. Nut*4...
  • Page 5 XG1002 assembly : Step 1 Step 2 Step 3 Step 4 Part list: A. Seat Plate* 1 B. Chair Legs* 4 C. Backrest Left* 1 DL. Left Arm rest*1 DR. Right Armrest* 1 E. M8 X 30 Bolt* 8 G. M6 X 35 Bolt* 9 H.
  • Page 6: Maintenance

    ASSEMBLY STEPS NOTE: Leave bolts half-tightened on the bench during assembly until the unit is assembled, then finish tightening bolts · STEP 1: Screw 8 pcs M8X30 bolts (E) into seat plate (A) STEP 2: Attach one of chair legs (B) to seat plate (A) with 2 pcs ∅ 8 washers(L), 2 pcs ∅...
  • Page 7 Manufacturer:Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
  • Page 8 Technical Support and E-Warranty Certificate www.vevor.com/support - 1 -...
  • Page 9 Supporto tecnico e certificato di garanzia elettronica www.vevor.com/support Panchine del parco We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 10 Park Benches wkl776 wkl-734 XG1002 - 1 -...
  • Page 11 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 12 ASSEMBLY AND USE wkl776 e wkl-734 un assieme B. Corrimano * 2 B . Pannello sedile * 1 C. Schienale * 1 D . Vite(M6X50) * 4 E. Vite (M6X55) * 4 F. Rondella * 8 G. Dado * 4...
  • Page 13 XG1002 un assieme : Passaggio 1 Passaggio 2 Passaggio 3 Passaggio 4 Elenco delle parti: A. Piastra del sedile * 1 B. Gambe della sedia * 4 C. Schienale sinistro DL. Poggiabraccio DR. Bracciolo destro * 1 E. Bullone M8 X 30 * sinistro*1 G.
  • Page 14: Manutenzione

    N. Rondella Molla ∅ 8 * 8 P. ∅ 6 Rondella elastica * 9 pz FASI DI MONTAGGIO NOTA: Lasciare i bulloni serrati a metà sul banco durante il montaggio finché l' unità non è fissata assemblato , quindi finire di stringere i bulloni · PASSO 1: Vite 8 pz M8X30 bulloni (E) nella piastra del sedile (A) PASSO 2:...
  • Page 15 Produttore : Shanghaimuxinmuyeyouxiangongsi Indirizzo: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importato negli Stati Uniti: Sanven Technology Ltd. Suite 250, 9166 Anaheim Luogo, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Page 16 Supporto tecnico e certificato di garanzia elettronica www.vevor.com/support - 1 -...
  • Page 17 Wsparcie techniczne i certyfikat e-gwarancji www.vevor.com/support Ławki parkowe We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 18 Park Benches wkl776 wkl-734 XG1002 - 1 -...
  • Page 19 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 20 ASSEMBLY AND USE wkl776 i wkl-734 to zespół C. Poręcze * 2 B . Deska siedziskowa * 1 C. Oparcie * 1 D . Śruba (M6X50) * 4 E. Śruba (M6X55) * 4 F. Podkładka * 8 G. Nakrętka...
  • Page 21 XG1002 to zestaw : Krok 1 Krok 2 Krok 3 Krok 4 Lista części: A. Płyta siedziska * 1 B. Nogi do krzeseł * 4 C. Oparcie lewe * 1 DL. Lewy podłokietnik*1 DR. Prawy podłokietnik * 1 E. Śruba M8 X 30 * 8 G.
  • Page 22 sprężysta * 8 9szt ETAPY MONTAŻU UWAGA: pozostawić śruby do połowy dokręcone na stole warsztatowym, aż urządzenie zostanie zamontowane zmontowane , następnie zakończ dokręcanie śrub · KROK 1: Śruba 8 szt . M8X30 śruby (E) w płycie siedziska (A) KROK 2: Przymocuj jedną...
  • Page 23 Producent : Shanghaimuxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN. Import do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Import do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, Kalifornia 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
  • Page 24 Wsparcie techniczne i certyfikat e-gwarancji www.vevor.com/support - 1 -...
  • Page 25 Technischer Support und E-Garantiezertifikat www.vevor.com/support Parkbänke We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 26 Park Benches wkl776 wkl-734 XG1002 - 1 -...
  • Page 27 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 28 Parkbank aus Metall: Bestehend aus Sitzgestell, Sitzplatte, Rückenlehne und Armlehnen etc., ASSEMBLY AND USE Wkl776 und Wkl-734 eine Baugruppe D. Handläufe * 2 B . Sitzbrett * 1 C. Rückenlehne * 1 D . Schraube (M6X50) * 4 E. Schraube (M6X55) * 4 F. Unterlegscheibe * 8...
  • Page 29 G. Mutter*4 XG1002 - Baugruppe : Schritt 1 Schritt 2 Schritt 3 Schritt 4 Stückliste: A. Sitzplatte * 1 B. Stuhlbeine * 4 C. Rückenlehne links DL. Linke Armlehne*1 DR. Rechte Armlehne * 1 E. M8 x 30 Bolzen * 8 G.
  • Page 30: Wartung

    Unterlegscheibe * 9 N. ∅ 8 Federscheibe * 8 P. ∅ 6 Federscheibe * 9St MONTAGESCHRITTE HINWEIS: während des Zusammenbaus auf der Bank halb angezogen, bis das Gerät montiert ist zusammengebaut , dann Schrauben festziehen · SCHRITT 1: Schraube 8 Stück M8X30 Schrauben (E) in die Sitzplatte (A) SCHRITT 2: Befestigen Sie eines der Stuhlbeine (B) mit 2 Stück ∅...
  • Page 31 Hersteller : Shanghaimuxinmuyeyouxiangongsi Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN. Importiert nach AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien In die USA importiert: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Page 32 Zertifikat für technischen Support und E-Garantie www.vevor.com/support - 1 -...
  • Page 33 Assistance technique et certificat de garantie électronique www.vevor.com/support Bancs de parc We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 34 Park Benches wkl776 wkl-734 XG1002 - 1 -...
  • Page 35 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 36 ASSEMBLY AND USE wkl776 et wkl-734 un assemblage E. Mains courantes * 2 B . Planche de siège * 1 C. Dossier * 1 D . Vis (M6X50) * 4 E. Vis (M6X55) * 4 F. Rondelle * 8 G. Écrou * 4...
  • Page 37 XG1002 un assemblage : Étape 1 Étape 2 Étape 3 Étape 4 Liste des pièces: A. Plaque de siège * 1 B. Pieds de chaise * 4 C. Dossier gauche * DL. Accoudoir gauche * 1 DR. Accoudoir droit * 1 E.
  • Page 38: Entretien

    N. ∅ 8 Rondelle à ressort P. Rondelle à ressort ∅ 6 * 9 pièces ÉTAPES D'ASSEMBLAGE REMARQUE : Laissez les boulons à moitié serrés sur le banc pendant l'assemblage jusqu'à ce que l' unité soit assemblé , puis terminer le serrage des boulons ·...
  • Page 39 Fabricant : Shanghaimuxinmuyeyouxiangongsi Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN. Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREETASTWOOD NSW 2122 Australie Importé aux États-Unis : Sanven Technology Ltd. Suite 250, 9166 Anaheim Lieu, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Page 40 Assistance technique et certificat de garantie électronique www.vevor.com/support - 1 -...
  • Page 41 Technische ondersteuning en e-garantiecertificaat www.vevor.com/support Parkbanken We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 42 Park Benches wkl776 wkl-734 XG1002 - 1 -...
  • Page 43 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 44 ASSEMBLY AND USE wkl776 en wkl-734 een montage F. Leuningen * 2 B . Zitplank * 1 C. Rugleuning * 1 D . Schroef (M6X50) * 4 E. Schroef (M6X55) * 4 F. Sluitring * 8 G. Moer*4...
  • Page 45 XG1002 een montage : Stap 1 Stap 2 Stap 3 Stap 4 Onderdelen lijst: A. Zitplaat * 1 B. Stoelpoten * 4 C. Rugleuning links * DL. Linkerarmsteun*1 DR. Rechterarmsteun * 1 E. M8 X 30 Bout * 8 G. M6 X 35 Bout* 9 H.
  • Page 46 MONTAGESTAPPEN OPMERKING: Laat de bouten tijdens de montage half aangedraaid op de bank zitten totdat de unit staat gemonteerd en voltooi vervolgens het aandraaien van de bouten · STAP 1: Schroef 8 stuks M8X30 bouten (E) in de zittingplaat (A) STAP 2: Bevestig een van de stoelpoten (B) aan de zitplaat (A) met 2 stuks ∅...
  • Page 47 Fabrikant : Shanghaimuxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Geïmporteerd naar AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australië Geïmporteerd in de VS: Sanven Technology Ltd. Suite 250, 9166 Anaheim Plaats, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Page 48 Technische ondersteuning en e-garantiecertificaat www.vevor.com/support - 1 -...
  • Page 49 Teknisk support och e-garanticertifikat www.vevor.com/support Park bänkar We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 50 Park Benches wkl776 wkl-734 XG1002 - 1 -...
  • Page 51 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 52 ASSEMBLY AND USE wkl776 och wkl-734 en sammansättning G. Ledstänger * 2 B . Sittbräda * 1 C. Ryggstöd * 1 D . Skruv (M6X50) * 4 E. Skruv (M6X55) * 4 F. Bricka * 8 G. Mutter*4...
  • Page 53 XG1002 en enhet : Steg 1 Steg 2 Steg 3 Steg 4 Dellista: A. Sätesplatta * 1 B. Stolsben * 4 C. Ryggstöd vänster DL. Vänster armstöd*1 DR. Höger armstöd * 1 E. M8 X 30 Bult * 8 G. M6 X 35 Bult* 9 H.
  • Page 54 MONTERINGSSEG OBS: Låt bultarna vara halvåtdragna på bänken under monteringen tills enheten är monteras och dra sedan åt bultarna · STEG 1: Skruv 8 st M8X30 bultar (E) i sätesplattan (A) STEG 2: Fäst ett av stolsbenen (B) till sittplattan (A) med 2 st ∅ 8 brickor (L), 2 st ∅...
  • Page 55 Tillverkare : Shanghaimuxinmuyeyouxiangongsi Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
  • Page 56 Teknisk support och e-garanticertifikat www.vevor.com/support - 1 -...
  • Page 57 Soporte técnico y certificado de garantía electrónica www.vevor.com/support Bancos del parque We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 58 Park Benches wkl776 wkl-734 XG1002 - 1 -...
  • Page 59 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 60 ASSEMBLY AND USE wkl776 y wkl-734 un conjunto H. Pasamanos * 2 B . Tabla de asiento * 1 C. Respaldo * 1 D . Tornillo (M6X50) * 4 E. Tornillo (M6X55) * 4 F. Arandela * 8 G. Tuerca *...
  • Page 61 XG1002 un conjunto : Paso 1 Paso 2 Paso 3 Paso 4 Lista de: A. Placa de asiento * 1 B. Patas de la silla * 4 C. Respaldo izquierdo * 1 DL. Reposabrazos DR. Reposabrazos derecho * E. Perno M8 X 30 * 8 izquierdo*1 G.
  • Page 62: Mantenimiento

    K. Tapa de plástico L. ∅ 8 Arandela * 8 M. ∅ 6 Arandela * 9 N. Arandela elástica ∅ 8 * P. Arandela elástica ∅ 6 * 9 piezas PASOS DE MONTAJE NOTA: Deje los pernos medio apretados en el banco durante el montaje hasta que la unidad esté...
  • Page 63 Fabricante : Shanghaimuxinmuyeyouxiangongsi Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREETASTWOOD NSW 2122 Australia Importado a EE. UU.: Sanven Technology Ltd. Suite 250, 9166 Anaheim Lugar, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Page 64 Soporte técnico y certificado de garantía electrónica www.vevor.com/support...

This manual is also suitable for:

Wkl-734Xg1002

Table of Contents