D-Link DCS-931L Faq page 35

Hide thumbs Also See for DCS-931L:

Step 4: Place the mounting base over the holes that are in the wall or ceiling. Make sure to

align the mounting base holes with the holes in the wall or ceiling. Use the supplied screws

to attach the mounting base to the surface of the wall.

Step 5: Place the base cover back on to the base. Make sure to align the base cover notch,

with the mounting base for future removal. Afterwards, reattach the camera head onto the

mounting base.

Step 6:

Adjust the angle of the camera as desired, then tighten the collar on the camera

stem to lock it in place.

Table of Contents

Need help?

Do you have a question about the DCS-931L and is the answer not in the manual?