How Do I Change The Lan Ip Address Of My Camera - D-Link DCS-931L Faq

Reset.
Step 2: Hold the paper clip down for 10 seconds and release.
Note: Do not unplug the power during this procedure.
Step 3: The unit will then reboot. Once the LAN/WLAN light stops blinking, the unit is reset
and all settings are restored to their defaults.

4. How do I change the LAN IP address of my camera?

Step 1: Open a web browser and enter the IP address of the camera in the address bar
(default is 192.168.0.20). Press Enter.
Step 2: The default username is admin and the password is blank (nothing). Click OK.