Congratulations on your new Jackery Explorer 600 Plus. Please read this manual carefully before using the product, particularly the relevant precautions to ensure proper use. Keep this manual in an accessible place for frequent reference. In compliance with laws and regulations, the right of final interpretation of this document and all related documents of this product resides with the Company.
GET TO KNOW YOUR GEAR Product Appearance LED Light Button Main Power Button Car Port LED Light USB-C1 Output AC Output USB-C2 Output USB-A Output AC Button DC/USB Button AC Input DC Input LCD DISPLAY Right Side Wi-Fi Bluetooth Quiet Charging Mode Battery Saving Mode Input Power Remaining Charge Time...
AC Wall Charging Indicator Car Charging Indicator Solar Charging Indicator Battery Power Indicator Remaining Battery Percentage Low Battery Indicator Fault Code High Temperature Warning Low Temperature Warning Energy Saving Mode AC Power Indicator Output Power Remaining Discharge Time UPS: Once you have connected the mains and the AC input port of the product via the AC charging cable, you can use the AC output port of the product to power your unit (at this point the AC power comes from the mains, not the battery of the product).
The default standby time of this product is 2 hours. (the product will automatically shut down after 2 hours without charging or discharging) The automatic shutdown time can be set on the Jackery App. *In Energy Saving mode, turn on DC output or AC output, or it will automatically shut down after 12 hours if there is no charging input or discharging output.
APP CONNECTION This product supports the connection of Jackery App for intelligent control and operation. Users can download the Jackery App through App Store or Google Play. For more information, please refer to Jackery App User Manual. CHARGING YOUR JACKERY EXPLORER 600 PLUS Fully charge the device before its first use.
Page 7
Explorer 600 Plus Charging via Solar Panel The Jackery Explorer 600 Plus can support one 200W solar panel or two 100W solar panels in series at most. You can directly connect the DC8020 port on Explorer 600 Plus and the solar panel for charging.
Page 8
*If the vehicle is running on bumpy roads, it is forbidden to use the car charger in case it burns due to a poor connection. The Company will not be responsible for any loss caused by non-stan- dard operation. Explorer 600 Plus Vehicle SAFETY PRECAUTIONS WHEN USING The basic safety precautions should be followed when using this product, including: a.
Any product purchased through an online auction house. Jackery's warranty does not apply to the battery cell unless the battery cell is fully charged by you within seven days after you purchase the product and at least once every 6 months...
Page 10
User Manual for Jackery App 1. To download the App and log in Search for “Jackery” in Google Play or App Store to install the App. After that, you can register and log in. 2. To add device 2.1 Click the button to add your device;...
Page 11
Press and hold the “POWER Button” and “DC/USB Button” for 3 seconds to reset the device, and then re-bind the device. 2.4 After the device is successfully connected, it is necessary to enter your Wi-Fi password and tap the OK button; Remarks: Please select a Wi-Fi network in 2.4GHz band.
Page 12
Download the Jackery Mobile App JACKERY AUSTRALIA PTY LTD 39 ANTIBES ST PARKDALE VIC 3195 E-mail: hello.aus@jackery.com Website: au.jackery.com...
Need help?
Do you have a question about the Explorer 600 Plus and is the answer not in the manual?
Questions and answers