Aiwa AV-D35 Operating Instructions Manual page 5

@)Surround speakers
—
CONNECTING SPEAKERS @
Front speakers
Speaker terminals
Connect front speakers (system A and/or B), a center speaker,
surround speakers and sub woofer to the corresponding speaker
terminals on the unit:
- the front speaker cords to the FRONT SPEAKERS terminals
- the center speaker cord to the CENTER SPEAKER terminals
- the surround speaker cords to the SURROUND SPEAKERS
terminals.
- for more powerful bass, the sub woofer (with a built-in amplifier)
cord to the SUPER WOOFER d iack
Lift up the terminal flap,
insert the speaker cord lead
into the terminal slot, then
close the flap. (Checkthat the
cord is connected securely.
Surround speakers
Speaker impedance
For all speakers, use speakers of 8 ohms or more.
Connecting + to +, – to – terminals
To get the proper sound effect, the speaker terminals on the unit
and the speaker should be connected with proper polarity; the +
terminal on the unit should be connected to the + terminal on
the speaker (and – to -).
EEiza
Be sure to connect the speaker cords correctly as shown in
the illustration on the right column. Improper connections can
cause short circuits in the SPEAKER(S) terminals.
Do not leave objects generating magnetism near the speakers.
—
7 r"
~.
Sub woofer
.
~.
Center speaker
ENGLISH '$