Table of Contents
Advertisement
:: Rating Control Setup
Set/Change Rating Level
1
Press SETUP/ENTER.
2
Press
/
and
to select DVD Setup Menu.
Y
B
"
3
Press
/
and
to select Rating Control. If the Enter Password screen
Y
B
"
appears, then Require Password has already been set to Yes. Skip to step 5.
4
Press
/
and
to select and set Require Password as follows:
Y
B
"
NO
Indicates that Rating Control is disabled.
YES
Indicates that Rating Control is enabled, and a password is required to
change Rating Control options.
5
Enter a 4-digit password using the 0-9 keys on the remote control. Be sure to
write down your password and store it in a safe place (see note below).
6
Press
/
and
to select Change Rating Level.
Y
B
"
7
Press
/
and
to select the desired Rating Level, and then press SETUP/
Y
B
"
ENTER to save and exit.
• If you lose your password, press the FF and REW keys on the front
panel for about 5 seconds. "RESET OK" will appear on the front
panel. Follow the instructions above to enter a new password.
• Not all DVDs are rated. (DVDs that are rated higher than the level
you select will not play without entering the password).
Change Password
1
Press SETUP/ENTER.
2
Press
/
and
to select DVD Setup Menu.
Y
B
"
3
Press
/
and
to select Rating Control.
Y
B
"
4
Use the 0-9 keys to enter the current password.
5
Press
/
and
to select Change Password.
Y
B
"
6
Use the 0-9 keys to enter the new password.
7
Use the 0-9 keys to re-enter the same password.
8
A menu will appear to indicate whether or not the password has been successfully changed. Press SETUP/ENTER to continue.
9
Press RETURN repeatedly to exit the menu system.
29
Advertisement
Table of Contents
