Table of Contents
Advertisement
:: Rear Panel Overview
1
IN (FROM ANT.)
Connect to your antenna, cable TV, or cable box with a coaxial cable.
2
OUT (TO TV)
Connect to your television with a coaxial cable.
3
LINE OUT (DVD & VCR)
video cables.
4
LINE IN 1
Connect to the audio/video outputs of an external device, such as a video game or additional VCR. Referred to as
Line 1 in the menu system.
5
GO-PORT
Connect to your computer with a 6-pin multimedia cable. Can be used to control the DVD+VCR with your PC
using special Go-Port software, available from SONICblue.
6
PROGRESSIVE VIDEO OUT SWITCH
a Progressive Video Input, you can choose 480p (Progressive) for an improved picture during DVD playback, see page 9.
7
LINE OUT (DVD Only)
These audio outputs are for use with the S-Video or Component Video outputs only.
8
COMPONENT VIDEO OUT
For the audio signal, use either Line Out or Digital Audio Out. For DVD playback only.
9
DIGITAL AUDIO OUT (COAXIAL)
back only).
10 DIGITAL AUDIO OUT (OPTICAL)
back only).
11 S-VIDEO OUT
Connect to a television or display device equipped with an S-Video input. For the audio signal, use either
Line Out or Digital Audio Out. For DVD playback only.
6
Connect to the audio/video inputs of your television or stereo receiver using standard audio/
If you are using the Component Video Out and your television is equipped with a
Connect to the audio inputs of your television or stereo receiver using standard audio cables.
Connect to a television or display device equipped with Component video inputs (Y, Pb, Pr).
Connect to an audio/video receiver equipped with a coaxial input (for DVD play-
Connect to an audio/video receiver equipped with an optical input (for DVD play-
Advertisement
Table of Contents
