Table of Contents
Advertisement
Audio/Video Receiver Connections
Follow these steps to connect the DVD+VCR to an audio/video receiver.
1
Connect DVD+VCR to Audio Receiver
cal digital audio cable from the DIGITAL AUDIO OUT jacks on the back
panel of the DVD+VCR to the matching digital audio inputs on your audio/
video receiver.
•
Use whichever connection is available on your audio/video receiver.
•
Use EITHER coaxial OR optical. Do NOT use both.
2
Adjust Dolby/DTS Decoder Settings
and DTS Decoder in the menu system (required); see page 28.
• If your audio/video receiver is equipped with a Dolby Digital or
DTS Decoder, you MUST enable the correct decoder setting in
the menu system to prevent damage to your speakers; see
page 28
Connect a coaxial OR opti-
Set Dolby Digital Decoder
DVD+VCR
Digital Audio Receiver
11
Advertisement
Table of Contents
