Page 2
END USER PHONE PROGRAMMING The following must be completed after the phones are set up for parked calls to be retrievable without dialing an extension. Type: SpeedDial Account ID: IMS Line Label: Park 1 Value:**88999-999-9999 Type: SpeedDial Account ID: IMS Line Label: Park 2 Value:**88999-999-9999 Type: SpeedDial...
Page 3
END USER PHONE PROGRAMMING STEP 1: From the home screen, press the plus sign in the lower right corner, as shown below. STEP 2: Enter the programming for Park 1, and press the checkmark in the top right corner, as shown below. STEP 3: Repeat steps 1 and 2 for Park 2, Park 3, and Park 4 using the programming listed on page 6.
DESK PHONE EXPERIENCE KEY THINGS TO REMEMBER • The two park options listed allow the user to use Group Call Park (GCP) or standard park. Both function in the same way. • A spoken message will indicate where the call is parked. •...
Page 5
DESK PHONE EXPERIENCE CALL PARK PROCESS 1. Press Park using the onscreen menu. The system will audibly prompt the user to enter an extension number or press #. If the user chooses, this message can be disregarded, and the call will park to the first phone in the Park Order.
Need help?
Do you have a question about the ONETALK T67LTE and is the answer not in the manual?
Questions and answers