Parts Reference - Intex FastFill AP619MP2 Owner's Manual

SERVICINg OF A DOUBlE-INSUlATED PRODUCT:
In a double-insulated product, two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product, nor should a means for grounding be
added to the product. Servicing of a double-insulated product requires extreme care and knowledge of the
system, and should be done only by qualified service personnel. Replacement parts for a double-insulated
product must be identical to those parts in the product. A double-insulated product is marked with the words
"DOUBLE INSULATION" or "DOUBLE INSULATED" and with the symbol .
The pump is designed to inflate the top and bottom chambers at the same time or separately.
Once the airbed is firmly inflated and feels stable, you can then adjust the firmness level of
the top chamber individually to your desired comfort level.
general
• No specific air pump maintenance is required.
• The appliance must be positioned so that the plug is accessible.
• Make sure the area is flat, level, clean and free from sharp objects, and within reach of
an electrical outlet.
• To prevent puncture or damage to the airbed, never drag the airbed across the floor. Lift
the inflated airbed when moving or changing location.
• For cleaning use only clean cloth with mild soapy solution. Do not use any chemicals.
• In case of repairs, use only common PVC repair glue and patches. For flocked surfaces:
619MP2
rub away the flocking material with an eraser first before applying the glue and/or patch.
619MP2
1
619MP2
619MP2
Part Descriptions:
1. Air chamber selection dial
2. Top air chamber (
3. Lock (all air chambers closed)/Pump off (
4. Bottom air chamber (
5. Both air chambers (
6. Manual inflation port
NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale. Due
to a policy of continuous product improvement, Intex reserves the right to change specifications
and appearance, which may result in updates to the instruction manual, without notice.
READ AND SAVE THESE INSTRUCTIONS

PARTS REFERENCE

2
619MP2
12
)
)
)
(22PO) AP619MP2 ELECTRIC PUMP ENGLISH 4.875" X 7.25" 12/15/2021
INSTRUCTIONS
3
4
5
6
7
619MP2
7. Inflate (
8. Deflate (
)
9. Inflate/deflate selection switch
10. Cord compartment
11. AC power cord
12. Airbed front
Page 2
10
9
8
)
)
22
PO
11